English
FrançaisNon-tariff Measures
Showing items 2861 to 2880 of 7642
-
Applied by South Africa on the entire world for 8539.21: -- Tungsten halogen
The measure came into effect on 07 August 2014
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 07 August 2014
- Publication where the measure is specified
- Government Gazette No. 37288, 7 February 2014
- Regulation where the measure is specified
- Amendment Of The Compulsory Specification For Incandescent Lamps (VC 8043)
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 General
This compulsory specification covers the requirements for safety, performance and quality of incandescent lamps intended for domestic and general lighting service, having:
A power rating up to and including 1500 W;
Rated voltage up to 250 V;
Caps of any type, material, shape and finish.
1.2 This compulsory specification shall not apply to the following lamp types:
Pilot lamps;
Special lamps, not used for domestic and general lighting;
Automotive lamps;
Extra low voltage lamps 5_ 12 V;
Temperature and shock-proof lamps. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.4 Lamp or packaging of the lamp shall be marked with light output in lumens (Im).
- Reference of the measure
- Regulation 3.4
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8539.21 -- Tungsten halogen No - Description
- Lamp i.e tungsten filament or tungsten halogen lamp.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa for 9020.00: Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters.
The measure came into effect on 20 May 2003
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 20 May 2003
- Publication where the measure is specified
- Government Notice No. R. 370 (Government Gazette 25040) Of 20 March 2003
- Regulation where the measure is specified
- Compulsory Specification For Breathing Apparatus
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the following types of breathing apparatus for personal respiratory protection:
a) self-contained open-circuit compressed-air type;
b) fresh-air hose for use with full face mask, half mask or mouthpiece assembly;
c) compressed-air line with full face mask, half mask or mouthpiece assembly;
d) compressed-air line or powered fresh-air hose, incorporating hood for abrasive blasting;
e) closed-circuit type;
f) compressed oxygen type;
g) closed-circuit type that comprises
1) a compressed oxygen type, or
2) chemical oxygen type;
h) escape type;
i) closed-circuit compressed oxygen type for special use;
j) powered fresh-air hose, incorporating hood;
k) compressed-air line, incorporating hood;
I) open-circuit compressed-air type with full mask or mouthpiece; and
m) open-circuit compressed-air type, incorporating hood.
1.2 This specification covers the design classification of breathing apparatus and the environments in which
these devices are to be used.
1.3 This specification also covers the following details:
a) connections between gas cylinder valves and gas cylinders;
b) threaded connections between the gas cylinder valve and the pressure reducer for devices that contain
oxygen;
c) oxygen and nitrogen or breathable air; and
d) dimensions and tolerances for connections.
1.4 This specification does not cover self-contained self-rescue apparatus of the type covered in SABS 1737:2001, Body-worn escape type breathing apparatus. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.3.9 Self-contained closed-circuit breathing apparatus (escape type) shall comply with SABS EN 400:1993,
Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus Compressed
oxygen escape apparatus - Requirements, testing, marking, and with SABS EN 401:1993, Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus Chemical oxygen (KO2) escape apparatus - Requirements, testing, marking, and with SABS EN 1061:1996, Respiratory protective devices for self-rescue - Self-contained closed-circuit breathing apparatus - Chemical oxygen (NaCIO2) escape apparatus - Requirements, testing, marking.
3.3.10 Self-contained open-circuit breathing apparatus (escape type) shall comply with SABS EN 402:1993,
Respiratory protective devices for escape - Self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly - Requirements, testing, marking, and with SABS EN 1146:1997, Respiratory protective devices for self-rescue - Self-contained open-circuit compressed air breathing apparatus incorporating a hood (compressed air escape apparatus with hood) - Requirements, testing, marking.
4.7.6 Lobster tails in catering packs may be presented graded or ungraded for size, but this shall be declared on the main panel of the label. Provided that the flesh is firm and sound, some minor defects to the shell of such tails may be present. In every other respect, tails in catering packs shall comply with the quality, wrapping, packing and labelling requirements of this specification.
6 Marking
6.1 Marking on containers that are not for export (see 6.2)
Except as allowed for in terms of 6.2, the following information shall appear on the outside of each container, in legible and indelible marking in a type face of such size and presentation as prescribed by the regulations promulgated under the Foodstuffs, Cosmetics and Disinfectants Act, 1972 (Act 54 of 1972), and the Trade Metrology Act, 1973 (Act 77 of 1973):
a) the name and full physical address of the manufacturer, producer, proprietor or controlling company or, inthe case of containers packed for any other person or organization, the name and full physical address of that person or organization;
b) the appropriate of the following product names, all words being given in bold letters of equal size, except that the word "unpurged" or its equivalent may be in letters of size at least one-third of that in which the product name appears:
1) in the case of frozen rock lobster tails prepared (and packed) from the Cape rocklobster (Jasus lalandii),the inscription "South African rock lobster tails"; in the case of frozen lobster tails prepared (and packed) from South Coast lobster (Palinurns gilchristi),the inscription "South African rock lobster tails, South Coast type"; in the case of frozen lobster tails prepared (and packed) from Natallobster (Palinurnsdelagoae),the inscription "Natal rock lobstertails"; in the case of frozen lobster tails prepared (and packed) from slipper lobster (Scyllaridae), the
inscription"Slipper lobster tails"; and in the case of frozen lobster tails prepared (and packed) from any other species of lobster, a true and appropriate description that will not mislead the consumer; 2) in the case of frozen whole raw Cape rock lobster (Jasus lalandii),the inscription "Whole raw South African rock lobster"; in the case of frozen whole raw South Coast lobster (Palinurus , gilchristi),the inscription "Whole raw South African rock lobster,South Coast type"; in the case I of frozen whole raw Natal lobster (Palinurusdelagoae),the inscription "Whole raw Natal rock lobster"; in the case o ffrozen whole raw slipper lobster (Scyllaridae), the inscription"Whole raw slipper lobster"; in the case of frozen whole raw lobster of any other species, a true and appropriate description that will not mislead the consumer; and in the case of frozen whole raw lobster packed unpurged in terms of the allowance made in 4.5.1, the word "unpurged" or its equivalent, given in immediate conjunction with the product name;
3) in the case of frozen whole cooked rock lobster prepared (and packed) from the Cape rock lobster (Jasus lalandii),the inscription"Whole cooked South African rock lobster"; in the case of frozen whole cooked lobster prepared (and packed) from South Coast lobster (Palinurus gilchristi),the inscription "Whole cooked South African rock lobster, South Coast type"; in the case of frozen whole cooked lobster prepared (and packed) from Natal lobster (Palinurus delagoae), the inscription "Whole cooked Natal rock lobster"; in the case of frozen whole
cooked lobster prepared (and packed) from slipper lobster (Scyllaridae), the inscription"Whole cooked slipper lobster";in the case of frozen whole cooked lobster prepared (and packed) from any other species of lobster, a true and appropriate description that will not mislead the consumer; and in the case of frozen whote cooked lobster packed unpurged in terms of the allowance made in 4.5.3,the word "unpurged or its equivalent, given in immediate conjunction with the product name; and
4) in the case of a frozen rock lobster product other than frozen rock lobster tails, frozen whole raw rock lobster and frozen whole cooked rock W t e r , a true and appropriate description of the product, including the name of the product and the presentation of the contents;
c) the date of manufacture and the identity of the factory in which the product was packed; the use of a code is permissible provided that the key to such coda is disclosed to the authority administering this specification (the code may also identify the quota holder on whose behalf the product was packed);
d) in the case of products for sale in the Republic of South Africa, the net mass of the contents, where
applicable(in accordance with the Regulations promulgated under the Trade Metrology Act, 1973 (Act 77 of 1973));
e) in the case of tails other than those in catering packs, the category identification(see 4.7);
f) the country of origin;
g) where applicable,words indicating that the pack is a catering pack;
h) the presence of the antioxidant (s),by name, on the immediate containers, and where appropriate,9
on the master containers;
i) words stating clearly and legibly that the product shall be stored at a temperature of -20 "Cor
lower;
j) where applicable, a list of the ingredients, in descending order of content;
k) a statement that the product is cooked or uncooked, as applicable, and instructions for storage,
given in the following manner, as relevant:
- Uncooked (or raw)- Keep frozen
- Partly cooked- Keep frozen. Do not refreeze once thawed
- Cooked- Keep frozen. Do not refreeze once thawed;
i) if the product has been glazed with sea water, a statement to this effect prominently displayed on the main panel of the label, in immediate conjunction with the name of the product;
m) where relevant, directions for use; and
n) any labelling requirement specifically called for by regulation.
The trade name of a product shall not be misleading to the consumer.
6.2 Labels
6.2.1 The information required in 6.1 shall be printed on each individual package or on the overwrap covering of such a package, or on a label of acceptable material attached to the package.
6.2.2 Labels on packages shall be clean and neat and securely attached. They shall not be superimposed on other labels or on matter printed direct on the packages.They shall not be applied by any person other than the manufacturer or his authorized agent.
6.2.3 Labels or sealing adhesives that are liable to deteriorate under the conditions of storage of the packaged products shall not be used.
6.3 Marking on outer containers that are not for export (see 6.4)
6.3.1 Outer containers shall be clean, neat and unbroken, and on every such container(carton, box, etc.) shall be printed or stencilled the quantity and size or net mass of the packages it contains and the information required by 6.1 (a), (b), (d) and (k), except that the physical address required by 6.1(a) need not be the full physical address but shall be sufficient for identification purposes. The method of preparation need not be given on the outer container.
6.3.2 The date of manufacture, the identity of the factory and the batch number (if applicable) shall be stamped or otherwise indelibly marked on the outer container or on a label securely attached to the outer container, or on a packing slip inserted into the outer container. A code may be used for the date of manufacture, provided that the key to the code is disclosed to the authority administering this specification. - Reference of the measure
- Regulations 3.3.9; 3.3.10 ; 4.7.6; 6.1 to 6.3
- Measure also domestic
- Yes
- Notes
- Full details about the NTM will be entered once SABS EN 402:1993, Respiratory protective devices for escape - Self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly and
SABS EN 1146:1997, Respiratory protective devices for self-rescue - Self-contained open-circuit compressed air breathing apparatus incorporating a hood (compressed air escape apparatus with hood) are made available by the NTM Manager.
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 9020.00 Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters. Yes Self-contained open-circuit breathing apparatus (escape type) - Description
- Self-contained open-circuit breathing apparatus (escape type)
Countries/Regions affected by the measure.
- Description
- All countries
-
Applied by South Africa on the entire world for 6506.10.90: -- Other
The measure came into effect on 08 September 1984
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 08 September 1984
- Publication where the measure is specified
- Government Notice 1135 (Government Gazette No. 9247) Of 8 June 1984
- Regulation where the measure is specified
- Compulsory Specification For Safety Helmets For Motor Cyclists
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- This specification covers requirements for the general design, construction, performance, marking, and labelling,
and testing of safety helmets for use by motor cyclists on the roads. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 8.3 Marking
The following are marked on each headform
(a) the basic plane (see Fig 9)
(b) the longitudinal and transverse planes through the vertival axis, and
(c) the lines ACDEF on both sides (see Fig. 3) - Reference of the measure
- Regulation 8.3
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 6506.10.90 -- Other Yes Headforms - Description
- Headforms
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 6506.10.90: -- Other
The measure came into effect on 08 September 1984
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 08 September 1984
- Publication where the measure is specified
- Government Notice 1135 (Government Gazette No. 9247) Of 8 June 1984
- Regulation where the measure is specified
- Compulsory Specification For Safety Helmets For Motor Cyclists
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- This specification covers requirements for the general design, construction, performance, marking, and labelling,
and testing of safety helmets for use by motor cyclists on the roads. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 6. Marking and labelling
6.1. Marking on helmets
6.1.1 The helmet shall be legibly and indelibly marked with the following information in a position where the marking is protected from obliteration:
(a) The manufacturer's name or trade mark or trade name;
(b) the batch identification;
(e) the date of manufacture.
6.1.2 The helmet shall be marked with the following information:
(a) The size or range of sizes;
(b) the mass of the helmet.
6.2 Label supplied with helmet: Every helmet shall have: a label , in both official languages, the information given in (a) – (d) and, when relevant, (e) below:
(a) For adequate protection the helmet must fit closely.
(b) The chin strap must be fastened correctly and under tension at all times. A chin cup must not be fitted to the chin strap.
(c) The helmet is made to absorb some of the energy of a blow by partial destruction of its component parts and, even though damage may not be readily apparent, any helmet subjected to a severe impact should be replaced.
(d) To maintain the full efficiency of the helmet there must be no alteration to the structure of the helmet or its component parts.
(e) The helmet should not be painted, and solvents must not be used to clean it. - Reference of the measure
- Regulation 6
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 6506.10.90 -- Other Yes Helmets for motor cyclists - Description
- Helmets for motor cyclists
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8703: Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 87.02), including station wagons and racing cars.
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No. 33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For MotorVehicles Of Category M1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category M1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after
completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to
designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models
previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates as specified in Schedule 1.
1.5 Except for the requirements of 3.7, which shall not be omitted or replaced, certain special category M1 motor vehicles designed or adapted for use as
a) mobile living accommodation (motor caravans),
b) ambulances and patient-transfer vehicles,
c) prisoner-conveyance vehicles,
d) hearses,
e) security and antiriot vehicles,
f) open sided passenger vehicles derived from vehicles other than category M1 vehicles may, alternatively, comply with the specific requirements of the relevant compulsory specification for another category of motor vehicle.
1.6 Vehicles that are sold with a category M2 seating configuration and with a category M1 seating configuration as an alternative, need not comply with the steering frontal impact requirements of 3.5.2.
1.7 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 4.3 Vehicle Fuel Economy and Carbon Dioxide Emission Labelling
4.3.1 Every petrol and diesel powered vehicle shall have applied to the inside of its windscreen a fuel consumption label.
4.3.2 The label shall be self adhesive and removable and of a type suitable for application to the windscreen.
4.3.3 The Label shall be placed in the bottom corner of the windscreen.
4.3.4 The fuel consumption label shall contain the following statements and information.
• The words "FUEL CONSUMPTION" or "FUEL ECONOMY" as a heading
• The vehicle make, model or description.
• The fuel consumption and carbon dioxide emissions values as determined by SANS 20101: 2006 recorded in Iitres per 100km and grams per km respectively.
4.3.5 Where a common label is utilised covering different engine, body styles or transmissions the fuel consumption and carbon dioxide figures quoted shall be those as applicable to the worst case combination.
4.3.6 As an alternative to sections 4.3.1, 4.3.2 and 4.3.3 above, an internally mounted label visible through the windscreen of the vehicle and suitable for removal and inclusion in the owner's manual may be displayed.
5.2.1.3 The data plate(s) shall be legibly and indelibly printed or stamped with the following details
of the model type or of the vehicle, as applicable:
a) the gross vehicle mass, in kilograms, for the model type, denoted and prefixed by the letters GVM/BVM;
b) the gross combination mass, in kilograms, for the model type, denoted and prefixed by the letters GCM/BKM; and
c) the gross axle mass-load of each axle, or the gross axle unit mass-load of each axle unit, in kilograms, for the model type, denoted and prefixed by the letters GAIBA or GAUIBAE, as applicable.
5.2.2 Optional data plate
The abbreviations given in 5.2.1.3(a), 5.2.1.3(b) and 5.2.1.3(c) are not required if the information is supplied in the following order:
a) gross vehicle mass;
b) gross combination mass; and
c) gross axle masses in the order front to rear.
5.2.3 Information on vehicle engine
The requirements for the vehicle engine number shall comply with the relevant regulations of the National Road Traffic Act, 1996 (Act 93 of 1996).
5.2.4 Vehicle identification number (VIN)
The vehicle identification number shall comply with the relevant requirements given in SABS ISO 3779: 1983, Road vehicles - Vehicle identification number (VIN) - Content and structure, and SABS ISO 4030: 1983, Road vehicles - Vehicle identification number (VIN) - Location and attachment, as published by Government Notice no. 3160 of 20 November 1992. However, the requirements for marking the VIN, as given in clause 5 of the said SABS ISO 4030, shall, for the purpose of this specification, be taken to read as follows:
5 VIN attachment
5.1 The VIN shall be marked direct on any integral part of the vehicle; it may be either on
the frame, or, for integral frame body units, on a part of the body not easily removed or
replaced.
5.2 The VIN shall also be marked on the data plate.
5.3 Deleted.
5.4 The height of the roman letters and the arabic numerals of the VIN shall be as follows:
- at least 7 mm if marked in accordance with 5.1 (frame, body, etc.) on motor vehicles and trailers; and
- at least 3 mm if marked in accordance with 5.2 (data plate).
5.2.5 Visible identification
An identification code made up of all or part of the VIN shall be applied to the motor vehicle, such
that it is readily visible to a person standing outside the vehicle, without the use of aids. In cases where only part of the VIN is used, the code shall be sufficient to provide unique identification of any unit of a model, provided the model is known.
5.3 Measuring units
All gauges, indicators or instruments that are fitted to a motor vehicle and are calibrated in physical units shall be calibrated in units as prescribed by the current applicable regulations promulgated under the Measuring Units and National Measuring Standards Act, 1973 (Act 76 of 1973). - Reference of the measure
- Regulations 4.3, 5.2.1.3, 5.2.2, 5.2.3, 5.2.5 and 5.3
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8703 Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 87.02), including station wagons and racing cars. No - Description
- Motor vehicles in category M1
category M1 motor vehicle is one that is used for the carriage of passengers, that has at least four wheels, and that
has seating accommodation for not more than eight passengers in addition to the driver of the vehicle.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 3808.94: -- Disinfectants
The measure came into effect on 14 July 1999
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 14 July 1999
- Publication where the measure is specified
- Government Notice R529 (Government Gazette 19999) Of 14 May 1999
- Regulation where the measure is specified
- Compulsory Specification For Disinfectants And Detergent-Disinfectants
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- This specification covers requirements for disinfectants and detergent-disinfectants intended for use on inanimate surfaces.
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 7.2 Marking
The following information shall appear on each container, or on a label securely attached to each container, in prominent, legible and indelible marking in type of such size and presentation as is prescribed by regulations promulgated under the Foodstuffs, Cosmetics and Disinfectants Act, 1972 (Act 54 of 1972), and the Trade Metrology Act, 1973 (Act 77 of 1973):
a) the registration number and full name and address of the manufacturer, producer, proprietor, or controlling company or, in the case of bottles packed for any other person or organization, the full name and address of that person or organization;
b) words indicating the type of disinfectant or detergent-disinfectant and its active disinfecting ingredient (see table 1 ) and whether it is suitable for use for cleaning-in-place operations;
c) the nominal volume or mass (as appropriate) of the contents, in plain type and in a colour that affords a distinct contrast to the colour of the container or label;
d) the batch identification; or
e) the production date of the batch (or both);
f) general instructions for use for the various purposes for which the disinfectant or detergent- disinfectant is suitable, including the recommended dilutions that allow the product to comply with the requirements of 4.2 (disinfecting efficacy), for the exposure period and test organism stated in the test method for each purpose;
g) where applicable, the pH value at the recommended dilution (see (f) above);
h) the first-aid treatment and the name of any antidote that may be used;
i) where applicable, warnings that:
1) the disinfectant or detergent-disinfectant should be stored in closed bottles in a dry place at a temperature not exceeding 30 °C, protected from intense light and apart from flammable materials, food products and packaging material;
2) contact of the undiluted disinfectant or detergent-disinfectant and its fumes with skin and eyes should be avoided;
3) rubber gloves and where necessary, goggles, should be worn when the disinfectant or detergent-disinfectant is being handled;
4) unless recommended by the manufacturer, the disinfectant or detergent-disinfectant should not be mixed with other incompatible substances (such as soap and other anionic detergents) where relevant;
5) some disinfectants, such as iodophors, could stain certain porous materials (such as plastics) and corrode certain metals (such as copper, iron, silver alloys and aluminium); and
6) the efficacy of the disinfectant could be compromised if surfaces are soiled;
j) the storage period or shelf life of the diluted disinfectant or detergent-disinfectant, when diluted to the lowest recommended concentration (highest use dilution);
k) the expiry date of the disinfectant or detergent-disinfectant;
I) if. in the case of disinfectants based on glutaraldehyde, the disinfectant or detergent-disinfectant is supplied in the form of a homogeneous liquid and an activator, a statement that the liquid and the activator shall be mixed before use as a disinfectant;
m) the strength designation and, in the case of coal-tar type disinfectants, the nominal Rideal-Walker coefficient (see 5.9.5);
n) in the case of bottles for black coal-tar type disinfectants, the following statement: "Black coal-tar type disinfectant liquid is not recommended for use with exceptionally hard water";
0) a substantiation of specific virucidal claims;
p) the product name (which shall not be misleading to the consumer); and
q) where applicable, a statement that the disinfectant or detergent-disinfectant has to be shaken before use. - Reference of the measure
- Regulation 7.2
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3808.94 -- Disinfectants Yes Disinfectants and detergent-disinfectants intended for use on inanimate surfaces. - Description
- Disinfectants and detergent-disinfectants intended for use on inanimate surfaces.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 9401.20: - Seats of a kind used for motor vehicles
The measure came into effect on 20 August 2003
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 20 August 2003
- Publication where the measure is specified
- Government Notice No. R. 862 (Government Gazette 25082) Of 20 June 2003
- Regulation where the measure is specified
- Compulsory Specification For Child Restraints For Use In Motor Vehicles
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- This specification applies to child restraint that are suitable for installation in power driven vehicles that have three or more wheels.
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 4 Markings
4.1 The child restraint shall be clearly and indelibly marked with the manufacturer's name, trade name or trade mark, and part number, and with a means of identification for traceability purposes.
4.2 One of the plastics parts of the child restraint device (such as the shell, impact shield , or booster cushion, but other than the belt(s)) shall be clearly and Indelibly marked with the year of manufacture.
4.3 If the restraint is to be used in combination with an adult safety belt, the correct routing of the webbing shall be clearly indicated by means of a drawing permanently attached to the restraint. If the restraint is held in place by the adult safety belt, the correct routing of the webbing shall be clearly marked on the product by colour coding, as follows:
a) red when the restraint is installed forward-facing; and
b) blue when the device is rearward facing.
The same colours shall be used on the labels on the device that illustrate the methods of use.
The separate routes of the lap and shoulder straps of the safety belt shall each be distinguished on the product by colour coding, or by words (or both).
4.4 The marking defined in this clause shall be visible with the restraint in the vehicle. In the case of group restraints, this marking shall also be visible with the child in the restraint.
4.5 Rearward-facing child restraints shall have a permanently attached label, visible in the Installed position, that bears the warning:
"EXTREME HAZARD - DO NOT USE ON PASSENGER SEATS EQUIPPED WITH AIRBAGS".
4.6 In the case of child restraints that can be used forward facing and rearward facing, the following words shall be included:
8 (e) The child restraint manufacturer shall provide information on the packing boxes to the address to which the customer can write to obtain further information on fitting the child restraint in specific cars.
j) In the case of special-needs restraints, the following information shall be clearly visible at the point of sale without removing the packing:
This special-needs restraint is designed to give extra support to children who have difficulty in sitting correctly in conventional seats. Always consult your doctor to make sure that this restraint system is suitable for your child. - Reference of the measure
- Regulation 4
Regulations 8.2 (e) and (j) - Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 9401.20 - Seats of a kind used for motor vehicles Yes Child restraint - Description
- Child restraints
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8414.80: - Other
The measure came into effect on 02 April 2001
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 02 April 2001
- Publication where the measure is specified
- Government Notice R93 (Government Gazette 22014) Of 2 February 2001
- Regulation where the measure is specified
- Compulsory Specification For Microbiological Safety Cabinets (Classes I, II And III)
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers requirements for the construction, fittings and pre-installation and post- installation performance of class I, class li and class III microbiological safety cabinets (also known as biological safety cabinets) intended to protect the operator and the environment from hazardous microbiological materials and (if so required by the customer or user or both), organic toxins and non-corrosive volatile organic agents.
NOTE - Microbiological safety cabinets are not intended to provide protection against corrosive chemical or radioactive materials.
1 .2 The specification does not cover the actual design of a safety cabinet and in no way restricts new design, provided that a microbiological safety cabinet of a new design complies with the requirements for materials, reliability, performance and safety given in this specification.
NOTE - Microbiological safety cabinets of class I, class II and class III should not be confused with laminar flow
clean workstations that usually discharge horizontally and vertically towards the operator and that do not provide
protection for an operator, but can even increase exposure to airborne hazards. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 8.2 Marking
For each class of cabinet, the appropriate of the following information shall be prominently, legibly and indelibly displayed on the front of each cabinet:
a) the designation, i.e.
1) Microbiological safety cabinet class I - Protection for personnel and the environment against ordinary microbiological agents, or
2) Microbiological safety cabinet class II - Protection for personnel, the environment and the product against ordinary microbiological agents, or
3) Microbiological safety cabinet class III - Protection for personnel, the environment and the products against special and extremely hazardous microbiological agents;
b) the manufacturer's name and address;
c) the total volume of the cabinet;
d) the words "WARNING: Do not use flammable or explosive and highly volatile liquids in this cabinet";
e) the serial number of the cabinet;
f) the year of manufacture; and
g) the electrical voltage (volts), frequency (hertz) and current drawn (amps). - Reference of the measure
- Regulation 8.2
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8414.80 - Other Yes Microbiological safety cabinets (classes I, II And II - Description
- Microbiological safety cabinets (classes I, II And II
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8716: Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof.
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette NO.32916, 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O1/O2(Caravans And Light Trailers)
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of categories 0 1 and O2 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models that have not previously been registered or licensed in South Africa.
1.2 The requirements of this specification, in so far as the vehicle parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another and the entire specification applies to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 This specification does not apply to experimental vehicles or to prototype vehicles constructed or imported by the original manufacturer or importers for the purpose of testing, assessment or development, or to agricultural trailers, unless they are subsequently sold for use on a public road in South Africa.
1.4 The relevant requirements of this specification shall take effect on the dates as specified in schedule 1.
1.5 Where a South African National Standard, including an International Standard or a UN ECE regulation adopted by South Africa as a National Standard, is incorporated by reference into this specification, only the technical requirements of the specifications for the commodity, and the tests to verify compliance apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 4.2 Information plates
4.2.1 Data plates
A trailer shall have a data plate or data plates permanently affixed to it, or to the trailer drawbar, in a conspicuous position and visible from the left-hand side of the trailer. The information stated in the relevant regulations of the National Road Traffic Act, 1996 (Act 93 of 1996) and the wording "For public road operation" shall be legibly and permanently imprinted or stamped on the data plate(s).
4.2.2 Vehicle Identification Number (VIN)
4.2.2.1 General
A trailer shall have a vehicle identification number that complies with the relevant requirements given in SANS 377911S0 3779 (SASS ISO 3779:1983), Road vehicles - Vehicle identification number (VIN)Content and structure, and in SANS 4030/lS0 4030 (SABS ISO 4030:1983), Road vehicles - Vehicle identification number (VIN) - Location and attachment, except for clause 5 of the said SANS 4030, which shall be amended in accordance with the requirements in 4.2.2.2 to 4.2.2.4.
4.2.2.2 The VIN shall be marked directly on an integral part of the vehicle; it may be either on the frame or, for integral frame body units, on a part of the body not easily removed or replaced.
4.2.2.3 The VIN shall also be marked on the data plate.
Reproduced by Sabinet Online in terms of Government Printer’s Copyright Authority No. 10505 dated 02 February 1998
4.2.2.4 The height of the roman letters and the arabic numerals of the VIN shall be as follows:
a) at least 7 mm if marked in accordance with 4.2.2.2 (frame, body, etc.) on trailers; and
b) at least 3 mm if marked in accordance with 4.2.2.3 (data plates).
4.2.3 Axle data
4.2.3.1 Each axle on a trailer shall be provided with a data plate as given in 4.2.3.2 or 4.2.3.3, where relevant. The particulars of the information on the data plate shall be permanently and legibly imprinted or stamped and the data plate shall be permanently affixed in a conspicuous position on the axle.
4.2.3.2 Each axle of a trailer shall have a data plate that gives the following information:
a) the axle make and serial number;
b) the load capacity of the axle; and
c) the maximum rolling radius.
4.2.3.3 Where a braking system is fitted, the axle(s) of a trailer shall have a data plate that gives the information given in 4.2.3.2 and the following information:
a) the type/size of the shoe/pad, and the grade of the brake lining material, and
b) in the case of cam brakes operated by air, the brake chamber size and the brake lever length.
4.3 Measuring units
All gauges, indicators and instruments that are fitted to a trailer shall be calibrated in units as prescribed by the current applicable regulations promulgated under the Measuring Units and National Measuring Standards Act, 1973 (Act 76 of 1973). - Reference of the measure
- Regulations 4.2 and 4.3
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8716 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof. Yes Trailers in category O1/O2 - Description
- Trailers in category O1/O2
Category O1 are single-axled trailers, other than semi-trailers, with a maximum mass not exceeding 0,75 t
Category O2 are trailers other than category OJ, with a maximum mass not exceeding 3,5 t
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 1604: Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs. and 1605: Crustaceans, molluscs and other aquatic invertebrates, prepared or preserved.
The measure came into effect on 09 September 2004
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 09 September 2004
- Publication where the measure is specified
- Government Notice R. 790 (Government Gazette 26530) Of 9 July 2004
- Regulation where the measure is specified
- Compulsory Specification For The Manufacture, Production, Processing And Treatment Of Canned Fish, Canned Marine Molluscs And Canned Crustaceans
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- his specification covers the manufacture, production, processing, and treatment of canned fish, canned fish products, canned marine molluscs, canned marine mollusc products, canned crustaceans and canned crustacean products.
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.2.18 Labelling
The construction and layout of the labelling area shall be such that orderly, neat and tidy conditions can be maintained and the possibility of confusion between different production lots will be precluded. Illumination shall be in accordance with the requirements in 3.2.7. - Reference of the measure
- Regulation 3.2.18
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 1604 Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs. Yes Canned fish 1605 Crustaceans, molluscs and other aquatic invertebrates, prepared or preserved. Yes Canned Marine Molluscs And Canned Crustaceans - Description
- Canned fish, canned marine molluscs and canned crustaceans
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by Zambia on the entire world
The measure came into effect on 29 December 2006
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 29 December 2006
- Publication where the measure is specified
- Statutory Instrument No 120 of 2006
- Regulation where the measure is specified
- ZS 558 Part 2 13A plugs, sockets, adaptors and connection units: Part 2. Switched and un switched socket-outlets
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Specifies requirements for 13 A switched and unswitched shuttered socket-outlets for household, commercial and light industrial purposes, with particular reference to safety in normal use
Also covers quality requirements, inspection, marking, labelling and testing - Reference of the measure
- Page 7
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- 13 A switched and unswitched shuttered socket-outlets for household, commercial and light industrial purposes, with particular reference to safety in normal use
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 29 December 2006
- Publication where the measure is specified
- Statutory Instrument No 120 of 2006
- Regulation where the measure is specified
- ZS 558 Part 3, 13A plugs, sockets, adaptors and connection units: Part 3. Specifications for adaptors
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Specifies requirements for adaptors having insulating sleeves on the line and neutral plug pins and suitable for use with socket-outlets complying with ZS 558: Part 2, with particular reference to safety in normal use
Also covers quality requirements, inspection, marking, labelling and testing - Reference of the measure
- Page 6
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Adaptors having insulating sleeves on the line and neutral plug pins and suitable for use with socket-outlets complying with ZS 558: Part 2, with particular reference to safety in normal use
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 29 December 2006
- Publication where the measure is specified
- Statutory Instrument No 120 of 2006
- Regulation where the measure is specified
- ZS 388:Bottled drinking water -Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Specifies the description, treatment, testing, packaging and labelling of bottled water for human consumption. The bottled water may be offered as table, mineral or natural mineral water, and either as non-carbonated (‘still’) or carbonated (‘sparkling’).
Also covers quality factors, inspection, microbial and hygiene requirements - Reference of the measure
- Page 8
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out PG: 7 Food products No - Description
- Bottled drinking water
Specifies the description, treatment, testing, packaging and labelling of bottled water for human consumption. The bottled water may be offered as table, mineral or natural mineral water, and either as non-carbonated (‘still’) or carbonated (‘sparkling’).
Also covers quality factors, inspection, microbial and hygiene requirements
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Statutory Instrument 43 of 2003
- Regulation where the measure is specified
- ZS 018: Pig feeds – Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Prescribes specifications, methods of analysis, sampling and testing creep feeds and concentrate, finishing feeds and concentrate for pigs.
Also covers quality requirements, inspection, labelling, hygiene and contaminants - Reference of the measure
- Page 3
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Prescribes specifications for the following pig feeds:-
Creep feed
Weaner feed
Grower feed
Finisher feed
Dry sow and boar feed
Lactating sow feed
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Statutory Instrument 43 of 2003
- Regulation where the measure is specified
- ZS 018: Pig feeds – Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Prescribes specifications, methods of analysis, sampling and testing creep feeds and concentrate, finishing feeds and concentrate for pigs.
Also covers quality requirements, inspection, labelling, hygiene and contaminants - Reference of the measure
- Page 3
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Prescribes specifications for the following pig feeds:-
Creep feed
Weaner feed
Grower feed
Finisher feed
Dry sow and boar feed
Lactating sow feed
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Statutory Instrument 43 of 2003
- Regulation where the measure is specified
- ZS 019 Ruminant Feeds - Specifications
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Prescribes specifications for the following ruminant feed categories:-
Milk Replacers / Sheep and Goat / Cattle / Dairy / Game
It also covers quality requirements, labelling, inspection, testing, hygiene, microbiological elements and contaminants - Reference of the measure
- Page 17
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Prescribes specifications for the following ruminant feed categories:-
Milk Replacers / Sheep and Goat / Cattle / Dairy / Game
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 19 November 2010
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 19 November 2010
- Publication where the measure is specified
- Statutory Instrument no. 102 of 2010
- Regulation where the measure is specified
- ZS 058: Laundry soap - Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- Prescribes requirements for laundry soaps of three types; pure, built and filled. It lists the fillers and builders that should be used in the later types.
Also covers quality requirements, packaging, labelling, inspection sampling and testing - Reference of the measure
- page 4
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Prescribes requirements for laundry soaps of three types; pure, built and filled.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 22 November 2013
- Publication where the measure is specified
- Statutory Instrument No.112 of 2013- Amendment of Regulations
- Regulation where the measure is specified
- Environmental Management (Licensing) Regulations, 2013.
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- E: Protection of the environment
- Description of the measure
- 27. The Agency shall, upon application by a person licensed to export hazardous waste, approve the export of the hazardous waste if —
(g) the labelling, packaging and transportation identified in the notification and movement document for transboundary movement of waste meet the requirements specified in the Eighth Schedule.
29. The labelling and packaging of hazardous waste shall conform to the requirements specified in the Eighth Schedule.
33 (2) A driver or person in charge of a vehicle or other conveyance transporting a pesticide or toxic substance shall -
(b) use hazard warning symbols on the vehicle or conveyance which comply with the standards for the classification and labelling of chemicals and the standards on the transportation of dangerous goods prescribed under the Standards Act;
49. An importer, producer, distributor, seller or exporter shall not import, produce, distribute, sell, export or in any manner deal with a product or other material containing an ozone depleting substance unless—
(a) the product or material containing the ozone depleting substance is labelled with the words “Not ozone friendly” or “ozone depleting”; or - Reference of the measure
- Part IV: Section 27 g; Eighth Schedule; Section 29
Part V: Section33(2b)
Part VI: Section 49a - Measure also domestic
- Yes
Products affected by the measure.
- Description
- Hazardous waste
Pesticide or toxic substance
Product or other material containing an ozone depleting substance
Countries/Regions affected by the measure.
-
Applied by Zambia on the entire world
The measure came into effect on 08 October 2010
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 08 October 2010
- Publication where the measure is specified
- Competition and Consumer Protection Act
- Regulation where the measure is specified
- Competition and Consumer Protection Act.
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health and B: Protection of life and health of animals
- Description of the measure
- 50 (1) A product that is sold in Zambia shall have a label to clearly indicate the product name, the ingredients used in the product, the date of manufacture and expiry of the product, the manufacturer’s name, the physical location of the manufacturer, the telephone number and any other contact details of the manufacturer.
(2) A person or an enterprise shall not sell any goods to consumers unless the goods conform to the mandatory consumer product information standard for the class of goods set by the Zambia Bureau of Standards or other relevant competent body.
(3) A person who, or an enterprise which, sells, exposes for sale, imports, displays or deals with a product in any manner contrary to sub-section (1) or (2), commits an offence and is liable, upon conviction, to a fine not exceeding three hundred thousand penalty units or to imprisonment for a period not exceeding three years, or to both. - Reference of the measure
- Section 50(1; 2; 3)
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- All Products
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 03 January 1994
Non-Tariff Measure
- NTM classification
- B31: Labelling requirements
- Date when the measure came into force
- 03 January 1994
- Publication where the measure is specified
- The Control of Goods Act
- Regulation where the measure is specified
- Control of Goods (Import of Medicinal Substances and Poisons) Regulations.
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health and B: Protection of life and health of animals
- Description of the measure
- 3. (1) No person shall import into Zambia any article consisting of or comprising a substance recommended as, or intended to be used as, a medicine unless there is written so as to be clearly legible on the article or a label affixed thereto, or, if the article is imported in a container, on the container or a label affixed thereto, or, if the article is imported in more than one container, on the inner container or a label affixed thereto-
(a) the appropriate designation of the substance so recommended, or of each of the active constituents thereof, or of each of the ingredients of which it has been compounded; and
(b) if the appropriate designation of each of the active constituents or the ingredients is written as aforesaid, the appropriate quantitative particulars of the constituents or ingredients. - Reference of the measure
- Regulation 3 ( 1 )
- Measure also domestic
- No
Products affected by the measure.
- Description
- Article consisting of or comprising a substance recommended as, or intended to be used as, a medicine
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world
B31: Labelling requirements
