Applied by Tanzania on the entire world for 3401.1: - Soap and organic surface-active products and preparations, in the form of bars, cakes, moulded pieces or shapes, and paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent : and 3401.20: - Soap in other forms
This measure prescribes requirements and test methods for herbal soap.
Reference of the measure
Clause 4, 5, 6, and 7
Measure also domestic
Yes
Notes
The standard covers different herbal soaps, which are in the market. This measure is meant for soaps using essential oils or blends of essential oils and herbal oils other than neem or jatropha.
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
3401.1
- Soap and organic surface-active products and preparations, in the form of bars, cakes, moulded pieces or shapes, and paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent :
This measure specifies the requirements and method of sampling and test for neutral spirit intended for use in the manufacture or blending of alcoholic beverages.
The objective of this measure is to provide guidance to processors and traders of dried banana in ensuring its quality and safety to consumers.
Description of the measure
This measure prescribes requirements and methods of sampling and test for dried banana from Musa spp. of the family Musaceae intended for direct human consumption or for other use in the food industry.
Reference of the measure
Clause 4, 5, 6, 7, 8, 9, and 10
Measure also domestic
Yes
Notes
Banana (Musa spp.) is one of the important crops in Tanzania. Bananas grown in Tanzania fall in three categories; namely sweet banana, plantain and East African highland banana. The former is normally consumed as dessert (sweet banana), while the plantain and East African highland banana are primarily consumed after cooking.
Sweet banana can in addition be used for preparation of desserts, purees and puddings; they can also be dried and eaten as snack. Plantains can be dried and ground into flour.
This measure specifies requirements and methods of sampling and test for chemical hair relaxers and hair waving products. It also applies to chemical cream hair relaxers based on alkalis or thioglycollates, as well as hair waving (curling) products based on thioglycollates.
Reference of the measure
Clause 5 and 6
Measure also domestic
Yes
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
3305.20.00
- Preparations for permanent waving or straightening
No
3305.90.00
- Other
Yes
Chemical hair relaxers and hair waving products
Description
TZS 775: 2014
Chemical hair relaxers and hair waving products —specification
This measure prescribes the requirements for whisky (whiskey). It does not apply to
whisky concentrate, which shall be subject to further processing before consumption.
This measure specifies the metrological and technical requirements for water meters
for cold potable water and hot water flowing through a fully charged, closed conduit. These water meters
incorporate devices which indicate the integrated volume
Reference of the measure
Clause 4, 5 and 6
Measure also domestic
Yes
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
9028.20.00
- Liquid meters
Yes
Water meters
Description
TZS 782-1: 2015
Water meters for cold potable water and hot water — Part 1:Metrological and technical requirements
This measure applies to water meters used to meter the volume of cold potable water and hot
water flowing through a fully charged, closed conduit. These water meters incorporate devices which
indicate the integrated volume.
Reference of the measure
Clause 4
Measure also domestic
Yes
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
9028.20.00
- Liquid meters
Yes
Water meters
Description
TZS 782-4: 2015
Water meters for cold potable water and hot water — Part 4: Non-metrological requirements
This measure applies to water meters used to meter the volume of cold potable water and hot
water flowing through a fully charged, closed conduit. These water meters incorporate devices which
indicate the integrated volume.
Reference of the measure
Clause 6, 7 and 8
Measure also domestic
Yes
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
9028.20.00
- Liquid meters
Yes
Water meters
Description
TZS 782-5: 2015
Water meters for cold potable water and hot water — Part 5: Installation requirements
This measure specifies the minimum requirements for complete single-vision ready-to-wear nearvision
spectacles. These spectacles are not intended for regular use without the approval of an eyecare
professional.
Reference of the measure
Clause 4 and 5
Measure also domestic
Yes
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
9004.90.10
--- For correcting vision
Yes
Single-vision ready-towear near-vision spectacles
Description
TZS 1547: 2012
Ophthalmic optics – Specification for single-vision ready-towear near-vision spectacles
The objective of this measure covers motorcycle and scooter tyres which are currently very useful on running motorcycle in our country, in this regard the need of putting forward the right specifications to harmonize the performance is of paramount importance. This measure has been set out to provide safe operational performance for motorcycle and scooter tyres and to place sufficient information on the tyres to permit their proper selection and use.
Description of the measure
This measure prescribes the requirements and methods of sampling and test for motorcycle and scooter tyres.
Performance of on road requirement of the tyres is not covered in this measure.
Applied by Tanzania for 3208: Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in Note 4 to this Chapter., 3209: Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in an aqueous medium. and 3210: Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather.
The objective of this measure is to specify the requirements for semi-gloss (egg-shell) solvent borne paints for interior use.
Description of the measure
This measure specifies requirements for semi-gloss solvent borne paints for interior and exterior use.
Reference of the measure
Clause 4 and 7
Measure also domestic
Yes
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
3208
Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in Note 4 to this Chapter.
Yes
Semi-gloss solvent borne paints for interior and exterior use
3209
Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in an aqueous medium.
Yes
Semi-gloss solvent borne paints for interior and exterior use
3210
Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather.
Yes
Semi-gloss solvent borne paints for interior and exterior use
Description
TZS 726: 2011
Semi-gloss solvent borne paints for interior and exterior use –Specification
Applied by Tanzania on the entire world for 7304: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel., 7305: Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel. and 7306: Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel.
Yes
Mild steel tubes and sockets screwed
7305
Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel.
Yes
Mild steel tubes and sockets screwed
7306
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel.
The objective of this measure is to describes methods of test for the performance of the incineration plant after installation when the plant is operating in accordance with the manufacturer's instruction
Coded list of objectives
E: Protection of the environment
Description of the measure
This measure describes methods of test for the performance of the incineration plant to be carried out after installation when the plant is operating in accordance with the manufacturer's instruction. In addition certain methods of calculation are given.
Reference of the measure
Reference clause, 3
Measure also domestic
Yes
Notes
Methods of test for materials and methods of construction are not included.
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
8417.80.00
- Other
Yes
Incineration plant for the destruction of hospital waste.
The objective of this measure is to identifies the information which should be supplied by the purchaser to the
Manufacturer, and the form in which this information should be presented.
Coded list of objectives
E: Protection of the environment
Description of the measure
This measure details a method for specifying requirements for incinerators for the destruction of hospital waste manufactured to specifiers' requirements
Reference of the measure
Reference clause, 3
Measure also domestic
Yes
Notes
The testing of incineration plant, after the completion of installation and setting to work is essential in order to establish that the specified performance and test criteria have been attained in any given installation.
This measure does not cover other items of plant such as charging machine, chimneys, flues, etc.
Products affected by the measure.
Code
Product
Partial coverage
Partial coverage indication
Date in
Date out
8417.80.00
- Other
Yes
Incineration plant for the destruction of hospital waste.
Description
Incineration plant for destruction of hospital waste.
English
Français
