English
FrançaisNon-tariff Measures
Showing items 4361 to 4380 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US EAS 856: 2016, 2-Pack acrylic resin based auto-refinishing paint — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, sampling and test methods for thinners for 2-Pack acrylic resin based auto-refinishing paint.
- Reference of the measure
- US EAS 856:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- thinners for 2-Pack acrylic resin based auto-refinishing paint
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US EAS 857:2016, Thinner for acrylic resin based auto-refinishing paints — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, sampling and test methods for thinner for acrylic resin based auto-refinishing paints.
- Reference of the measure
- US EAS 857:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- thinner for acrylic resin based auto-refinishing paints
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 10425:2003, Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements and terms of acceptance for the manufacture and testing of steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries.
- Reference of the measure
- US ISO 10425:2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- steel wire ropes not exceeding rope grade 2160 for the petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 10432:2004, Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides the minimum acceptable requirements for subsurface safety valves (SSSVs). It covers subsurface safety valves including all components that establish tolerances and/or clearances which may affect performance or interchangeability of the SSSVs. It includes repair operations and the interface connections to the flow control or other equipment, but does not cover the connections to the well conduit.
- Reference of the measure
- US ISO 10432:2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- subsurface safety valves (SSSVs)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15156-2:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.
- Reference of the measure
- US ISO 15156-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15156-3:2015, Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations.
- Reference of the measure
- US ISO 15156-3:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 17348:2016, Petroleum and natural gas industries — Materials selection for high content CO2 for casing, tubing and downhole equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides guidelines and requirements for material selection of both seamless casing and tubing, and downhole equipment for CO2 gas injection and gas production wells with high pressure and high CO2 content environments [higher than 10 % (molar) of CO2 and 1 MPa CO2 partial pressure]. Oil production wells are not covered in this standard. This standard only considers materials compatibility with the environment.
- Reference of the measure
- US ISO 17348:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- seamless casing and tubing
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 10441:2007, Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — Special-purpose applications
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for couplings for the transmission of power between the rotating shafts of two machines in special-purpose applications in the petroleum, petrochemical and natural gas industries. Such applications are typically in large and/or high speed machines, in services that can be required to operate continuously for extended periods, are often unspared and are critical to the continued operation of the installation.
- Reference of the measure
- US ISO 10441:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- couplings for the transmission of power
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 13691:2001, Petroleum and natural gas industries — High-speed special-purpose gear units
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements for enclosed, precision, single and double helical, one- and two-stage speed increasers and reducers of parallel shaft design with pinion speeds of 3000 min−1 or greater, or pitch line velocities of 25 m/s or greater, for special purpose applications.
- Reference of the measure
- US ISO 13691:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- enclosed, precision, single and double helical, one- and two-stage speed increasers and reducers of parallel shaft design with pinion speeds of 3000 min−1 or greater, or pitch line velocities of 25 m/s or greater, for special purpose applications.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15547-1:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 1: Plate-and-frame heat exchangers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries. It is applicable to gasketed, semi-welded and welded plate-and-frame heat exchangers
- Reference of the measure
- US ISO 15547-1:2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- plate-and-frame heat exchangers for use in petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 15547-2:2005, Petroleum, petrochemical and natural gas industries — Plate-type heat exchangers — Part 2: Brazed aluminium plate-fin heat exchangers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the mechanical design, materials selection, fabrication, inspection, testing, and preparation for shipment of brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries
- Reference of the measure
- US ISO 15547-2:2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- brazed aluminium plate-fin heat exchangers for use in petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 9241-161:2016, Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard describes visual user-interface elements presented by software and provides requirements and recommendations on when and how to use them.
- Reference of the measure
- US ISO 9241-161:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- visual user-interface elements
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-1:2016, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access.
- Reference of the measure
- US ISO 14122-1:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- stationary machines
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-2:2016, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for non-powered working platforms and walkways which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, sliding) and movable parts of those fixed means of access.
- Reference of the measure
- US ISO 14122-2:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- non-powered working platforms and walkways which are a part of a stationary machine
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-3:2016, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for non-powered stairs, stepladders and guard-rails which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of those fixed means of access.
- Reference of the measure
- US ISO 14122-3:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- non-powered stairs, stepladders and guard-rails
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 14122-4:2016, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements for fixed ladders which are a part of a stationary machine, and to the non-powered adjustable parts (e.g. foldable, slidable) and movable parts of fixed ladder systems.
- Reference of the measure
- US ISO 14122-4:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- fixed ladders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 17916:2016, Safety of thermal cutting machines
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance, and putting out of service. This standard applies to machinery using thermal cutting and or marking processes such as oxy-fuel, plasma arc. This standard applies to machinery the basis of which is either designed as open gantry, cantilever machine, or the track of which is incorporated in the cutting table.
- Reference of the measure
- US ISO 17916:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- machinery
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 03 February 2017
- Publication where the measure is specified
- The Uganda Gazette, Vol. CX No. 7
- Regulation where the measure is specified
- US ISO 20187:2016, Inflatable play equipment — Safety requirements and test methods
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to inflatable play equipment intended for use by children up to 14 years of age individually and as a group activity. This standard specifies safety requirements for inflatable play equipment for which the primary activities are bouncing and sliding.
- Reference of the measure
- US ISO 20187:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- inflatable play equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 2:2013, Maize grains – Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements and methods of sampling and test for maize grains of varieties grown from common maize grains, Zea Mays indentata L., and/or Zea mays indurata L., or their hybrids intended for human consumption.
- Reference of the measure
- US EAS 2:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- maize grains of varieties grown from common maize grains, Zea Mays indentata L., and/or Zea mays indurata L., or their hybrids
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 27 January 2014
- Publication where the measure is specified
- THE UGANDA GAZETTE Vol. CVII No. 5 of JANUARY 2014
- Regulation where the measure is specified
- US EAS 46:2013, Dry beans – Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and methods of sampling and test for dry common beans (Phaseolus vulgaris Linn) intended for human consumption. (This Uganda Standard cancels and replaces US EAS 46:2011, Dry beans – Specification, which has been technically revised).
- Reference of the measure
- US EAS 46:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- dry common beans (Phaseolus vulgaris Linn)
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
