English
FrançaisNon-tariff Measures
Showing items 4441 to 4460 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60335-1: 2010, Household and similar electrical appliances — Safety — Part 1: General requirements (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single phase appliances and 480 V for other appliances.
EC 60335-1:2010+A1:2013+A2:2016 deals with the safety of electrical appliances for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. Battery-operated appliances and other d.c. supplied appliances are within the scope of this standard. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. Examples of such appliances are catering equipment, cleaning appliances for commercial use, and appliances for hairdressers. The principal changes in this edition as compared with the fourth edition are as follows:
- updated the text of the standard to align with the most recent editions of the dated normative references;
- modified the functional safety requirements using programmable electronic circuits including software validation requirements;
- updated Clause 29 to cover insulation requirements subjected to high frequency voltages as in switch mode power supply circuits;
- updated Subclause 30.2 to further align the pre-selection option with the end-product test option;
- deleted some notes and converted many other notes to normative text;
- clarified requirements for class III constructions.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. The contents of the corrigenda of July 2010, April 2011, January 2014 and April 2014 have been included in this copy. This consolidated version consists of the fifth edition (2010), its amendment 1 (2013) and its amendment 2 (2016). Therefore, no need to order amendments in addition to this publication. The contents of the corrigendum of September 2016 have been included in this copy. - Reference of the measure
- US IEC 60335-1: 2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- electrical appliances for household and similar purposes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60335-2-3: 2012, Household and similar electrical appliances — Safety — Part 2-3: Particular requirements for electric irons (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard deals with the safety of electric dry irons and steam irons, including those with a separate water reservoir or boiler having a capacity not exceeding 5 L, for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use, but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. it also highlights marking requirements.
- Reference of the measure
- US IEC 60335-2-3: 2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- electric dry irons and steam irons, including those with a separate water reservoir or boiler having a capacity not exceeding 5 L, for household and similar purposes, their rated voltage being not more than 250 V.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60335-2-6: 2008, Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltages being not more than 250 V for single phase appliances connected between phase and neutral, and 480 V for other appliances. It also highlights marking requirements
- Reference of the measure
- US IEC 60335-2-6: 2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltages being not more than 250 V for single phase appliances connected between phase and neutral, and 480 V for other appliances.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60335-2-7: 2012, Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard deals with the safety of electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not being more than 250 V for single phase appliances and 480 V for other appliances. This standard also deals with the safety of electric washing machines for household and similar use employing an electrolyte instead of a detergent. It also highlights marking requirements.
- Reference of the measure
- US IEC 60335-2-7: 2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Electric washing machines for household and similar use, that are intended for washing clothes and textiles, their rated voltage being not being more than 250 V for single phase appliances and 480 V for other appliances
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60335-2-21: 2009, Household and similar electrical appliances — Safety — Part 2-21: Particular requirements for storage water heaters (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard deals with the safety of storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not being more than 250 V for single phase appliances and 480 V for other appliances. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home.It also highlights marking requirements.
- Reference of the measure
- US IEC 60335-2-21: 2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Storage water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated voltage being not being more than 250 V for single phase appliances and 480 V for other appliances.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60335-2-24: 2012, Household and similar electrical appliances — Safety — Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard deals with the safety of refrigerating appliances, ice-cream appliances and ice-makers, their rated voltage being not being more than 250 V for single phase appliances, 480 V for other appliances and 24 V d.c for appliances when battery operated. It also highlights marking requirements.
- Reference of the measure
- US IEC 60335-2-24: 2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- refrigerating appliances, ice-cream appliances and ice-makers, their rated voltage being not being more than 250 V for single phase appliances, 480 V for other appliances and 24 V d.c for appliances when battery operated.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60335-2-80: 2008, Household and similar electrical appliances — Safety — Part 2-80: Particular requirements for fans (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard deals with the safety of electric fans for household and similar purposes, their rated voltage being not more than 250 V for single phase appliances and 480 V for other appliances. It also highlights marking requirements.
- Reference of the measure
- US IEC 60335-2-80: 2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- electric fans for household and similar purposes, their rated voltage being not more than 250 V for single phase appliances and 480 V for other appliances
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 60669-1: 2007, Switches for household and similar fixed-electrical installations — Part 1: General requirements (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies quality requirements, and marking for manually operated general switches, for a.c only with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
- Reference of the measure
- US IEC 60669-1: 2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Manually operated general switches, for a.c only with a rated voltage not exceeding 440 V and a rated current not exceeding 63 A, intended for household and similar fixed electrical installations, either indoors or outdoors.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 61646: 2008, Thin-film terrestrial photovoltaic (PV) modules — Design qualification and type approval
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down requirements and markings for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long term operation in general open-air climates as defined in IEC 60721-2-1. This standard is intended to apply to all terrestrial flat plate module materials not covered by US IEC 61215. (This Uganda Standard cancels and replaces US 553:2005, Thin film terrestrial PV (PV) modules – design qualification and type approval, which has been republished).
- Reference of the measure
- US IEC 61646: 2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- terrestrial, thin-film photovoltaic modules suitable for long term operation in general open-air climates
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US IEC 61702: 1995, Rating of direct coupled photovoltaic (PV) pumping systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard defines predicted short-term characteristics (instantaneous and for a typical daily period) and marking of direct coupled photovoltaic (PV) water pumping systems. It also defines minimum actual performance values to be obtained on-site. It does not address PV pumping systems with batteries.
- Reference of the measure
- US IEC 61702
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- direct coupled photovoltaic (PV) water pumping systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1022-1:2013, Material measures of length for general use — Part 1: Metrological and technical requirements (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to material measures of length for general use, hereinafter called “measures”. This standard specifies the technical, metrological and administrative conditions which are mandatory for these measures. It also includes the requirements for digital readouts on the cases of tapes, whether electronic or mechanical. This standard does not apply to high-precision measures used by industry in the field of mechanics or in geodesy (for example: gauge blocks, geodetic wires and precision line measures). It also does not address safety aspects, for example the use of material measures with electronic devices in hazardous areas. Guidelines for these aspects should be followed in accordance with the applicable international, regional or national regulations or other standards.
- Reference of the measure
- US 1022-1:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Material measures of length
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1025:2013, Moisture meters for cereal grain and oilseeds — Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and marking for moisture meters for cereal grains and oilseeds, that is to say instruments measuring and indicating, either directly or by means of conversion tables and (or) correction tables, the moisture content of cereal grains and the moisture and volatile matter content of oilseeds. This standard applies only to moisture meters used for measurements on statistical samples.
- Reference of the measure
- US 1025:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- moisture meters for cereal grains and oilseeds,
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1039:2013, Speedometers, mechanical odometers and chronotachographs for motor vehicles — Metrological requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements and marking for speedometers, mechanical odometers and chronotachographs for motor vehicles.
- Reference of the measure
- US 1039:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- speedometers, mechanical odometers and chronotachographs for motor vehicles.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1042:2013, Alcoholometers and alcohol hydrometer; and thermometers for use in alcoholometry— Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standards specifies the requirements and marking for alcoholometers and alcohol hydrometers used for the determination of the alcoholic strength of mixtures of water and ethanol, and to thermometers for use in alcoholometry. It sets out technical and metrological specifications for these instruments, in accordance with International Alcoholometric Tables. This standard covers glass hydrometers indicating percentage alcoholic strength by mass, referred to as mass alcoholometers, glass hydrometers indicating percentage alcoholic strength by volume, referred to as volume alcoholometers, and glass hydrometers indicating density in kilogram per cubic metre, referred to as alcohol hydrometers.
- Reference of the measure
- US 1042:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- alcoholometers and alcohol hydrometers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1532:2013, Hair extensions — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, Packaging and labelling and methods of test for hair extensions for use on humans.
- Reference of the measure
- US 1532:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Hair extensions
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1502:2013, Fresh Bermuda onions — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies quality requirements, contaminants, hygiene, packaging, labelling, for onions of varieties (cultivars) of Bermuda-Granex-Grano grown from Allium cepa L. to be supplied to the consumer in the natural state. This standard does not specify requirements for Bermuda onions for industrial processing.
- Reference of the measure
- US 1502:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- onions of varieties (cultivars) of Bermuda-Granex-Grano grown from Allium cepa L.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1503:2013, Fresh common green onions — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies quality requirements, contaminants, hygiene, packaging, labelling, for fresh common green onions of varieties (cultivars) grown from Allium fistulosum, Allium ascalonicum, Allium chinense and other non-bulbing onion cultivars to be supplied fresh to the consumer. This standard does not specify requirements for green onions for industrial processing.
- Reference of the measure
- US 1503:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fresh common green onions of varieties (cultivars) grown from Allium fistulosum, Allium ascalonicum, Allium chinense and other non-bulbing onion cultivars
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 1504:2013, Fresh Creole onions — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies quality requirements, contaminants, hygiene, packaging, labelling, for Creole onions of varieties (cultivars) grown from Allium cepa L. to be supplied to the consumer in the natural state. This standard does not specify requirements for Creole onions for industrial processing.
- Reference of the measure
- US 1504:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Creole onions of varieties (cultivars) grown from Allium cepa L.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 925:2012, Chemicals used for treatment of water intended for human consumption — Sodium hypochlorite — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the Quality requirements, Labelling, transportation, packaging and storage methods of sampling and test for sodium hypochlorite solution used for disinfection of water intended for human consumption.
- Reference of the measure
- US 925:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- sodium hypochlorite solution used for disinfection of water intended for human consumption.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 25 October 2013
- Publication where the measure is specified
- Uganda Gazette Vol. CV No. 54 of 25th October 2013
- Regulation where the measure is specified
- US 926:2012, Chemicals used for treatment of water intended for human consumption — Polyamides — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the Quality requirements, Labelling, transportation, packaging and storage methods of sampling and test for polyamines used for water treatment intended for human consumption.
- Reference of the measure
- US 926:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- polyamines used for water treatment
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
