English
FrançaisNon-tariff Measures
Showing items 4841 to 4860 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US EAS 361:2004, Carbaryl dusting powders — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard prescribes the requirements and the methods of test for carbaryl dusting powders.
- Reference of the measure
- US EAS 361:2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- carbaryl dusting powders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8124-1:2007, Safety of toys — Part 1: Safety aspects related to mechanical and physical properties (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the categories of flammable materials that are prohibited in all toys, and requirements concerning flammability of certain toys when they are subjected to a minor source of ignition.
- Reference of the measure
- US ISO 8124-1:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Toys
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9994: 2005 Lighters — Safety specification/ US ISO 9994: 2005/Amd.1: 2008, Lighters — Safety specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This standard establishes requirements for lighters to ensure a reasonable degree of safety for normal use or reasonably foreseeable misuse of such lighters by users. The safety specification given in this Standard applies to all flame-producing products commonly known as cigarette lighters, cigar lighters and pipe lighters. It does not apply to matches, nor does it apply to other flame-producing products intended solely for igniting materials other than cigarettes, cigars, and pipes. The safety specification given in this standard cannot eliminate all hazards, but is intended to reduce potential hazards to users.
- Reference of the measure
- US ISO 9994: 2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- lighters
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 4643:1992, Moulded plastics footwear — Lined or unlined poly(vinyl chloride) boots for general industrial use — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for boots, moulded from poly(vinyl chloride) compounds, for general industrial use. The boots may be either fabric-lined or unlined and of any style from ankle boots to full thigh height inclusive.
- Reference of the measure
- US ISO 4643:1992
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- boots, moulded from poly(vinyl chloride) compounds
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5423:1992, Moulded plastics footwear — Lined or unlined polyurethane boots for general industrial use — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for boots, moulded from polyurethane compound, for general industrial use. The boots may be either fabric-lined or tinlined and of any style from ankle boots to full thigh height inclusive.
- Reference of the measure
- US ISO 5423:1992
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Lined or unlined polyurethane boots
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 20345: 2011, Personal protective equipment — Safety footwear
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies basic and additional (optional) requirements for safety footwear used for general purpose. It includes, for example, mechanical risks, slip resistance, thermal risks, ergonomic behaviour. Special risks are covered by complementary job-related standards (e.g. footwear for firefighters, electrical insulating footwear, protection against chain saw injuries, protection against chemicals and molten metal splash, protection for motor cycle riders).
- Reference of the measure
- US ISO 20345: 2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- safety footwear
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 4706:2008, Gas cylinders — Refillable welded steel cylinders — Test pressure 60 bar and below
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements concerning material selection, design, construction and workmanship, procedure and test at manufacture of refillable welded-steel gas cylinders of a test pressure not greater than 60 bar1), and of water capacities from 0.5 l up to and including 500 l exposed to extreme worldwide temperatures (-50 °C to 65 °C) used for compressed, liquefied or dissolved gases. Transportable large cylinders of water capacity above 150 l and up to 500 l may be manufactured and certified to this standard provided handling facilities are provided. This standard is primarily intended to be used for industrial gases other than Liquefied Petroleum Gas (LPG), but may also be applied for LPG. For specific LPG applications see ISO 22991.
- Reference of the measure
- US ISO 4706:2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7866:2012, Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at time of manufacture of refillable seamless aluminium alloy gas cylinders of water capacities up to and including 150 litres for compressed, liquefied and dissolved gases for worldwide use (normally up to +65 °C).
- Reference of the measure
- US ISO 7866:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9809-1: 2010, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. This standard is applicable to cylinders with a maximum actual tensile strength Rma of less than 1 100 MPa.
- Reference of the measure
- US ISO 9809-1: 2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9809-2:2010, Gas cylinders — Refillable seamless steel gas cylinders —Design, construction and testing — Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases. This part of US ISO 9809 is applicable to cylinders with a maximum tensile strength Rma ≥ 1 100 MPa. It is not applicable to cylinders with Rma, max >1 300 MPa for diameters >140 mm and guaranteed wall thicknesses a’ ≥ 12 mm and Rma, max >1 400 MPa for diameters ≤ 140 mm and guaranteed wall thicknesses a’ ≥ 6 mm, because beyond these limits, additional requirements can apply.
- Reference of the measure
- US ISO 9809-2:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9809-3:2010, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 3: Normalized steel cylinders
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable normalized or normalized and tempered seamless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied and dissolved gases.
- Reference of the measure
- US ISO 9809-3:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9809-4:2014, Gas cylinders — Refillable seamless steel gas cylinders — Design, construction and testing — Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examinations, and tests at manufacture of refillable seamless stainless steel gas cylinders of water capacities from 0.5 l up to and including 150 l for compressed, liquefied, and dissolved gases. This part of US ISO 9809 is applicable to cylinders with a maximum actual tensile strength, Rma, of less than 1 100 MPa.
- Reference of the measure
- US ISO 9809-4:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 11114-1:2012, Gas cylinders — Compatibility of cylinders and valve materials with gas contents — Part 1: Metallic materials
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides requirements for the selection of safe combinations of metallic cylinder and valve materials and cylinder gas content. The compatibility data given is related to single gases and to gas mixtures. Seamless metallic, welded metallic and composite gas cylinders and their valves, used to contain compressed, liquefied and dissolved gases, are considered.
- Reference of the measure
- US ISO 11114-1:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 11118:1999, Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes and tests at manufacture of non-refillable metallic gas cylinders of welded, brazed or seamless construction for compressed, liquefied and dissolved gases exposed to extreme worldwide ambient temperatures.
- Reference of the measure
- US ISO 11118:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- gas cylinders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 17:1981, Standard for canned applesauce
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned applesauce offered for direct consumption, including for catering purposes or for repacking if required. It does not apply to the product when indicated as being intended for further processing.
- Reference of the measure
- US CODEX STAN 17:1981
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- applesauce
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 42:1981, Standard for canned pineapple
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned pineapple.
- Reference of the measure
- US CODEX STAN 42:1981
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pineapple
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 52:1981, Standard for quick frozen strawberries
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to quick frozen strawberries (excluding quick frozen strawberry puree) of the species Fragaria grandiflora L. and Fragaria vesca L. offered for direct consumption without further processing, except for size grading or repacking if required. It does not apply to the product when indicated as intended for further processing or for other industrial purposes..
- Reference of the measure
- US CODEX STAN 52:1981
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- strawberry
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 60:1981, Standard for canned raspberries
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned raspberries.
- Reference of the measure
- US CODEX STAN 60:1981
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- raspberries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 61:1981, Standard for canned pears
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned pears offered for direct consumption, including for catering purposes or for repacking if required. It does not apply to the product when indicated as being intended for further processing.
- Reference of the measure
- US CODEX STAN 61:1981
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pears
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US CODEX STAN 62:1981, Standard for canned strawberries
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to canned strawberries.
- Reference of the measure
- US CODEX STAN 62:1981
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- strawberries
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
