English
FrançaisNon-tariff Measures
Showing items 6321 to 6340 of 7642
-
Applied by Zambia on the entire world
The measure came into effect on 18 July 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 18 July 2003
- Publication where the measure is specified
- Statutory Instrument No. 78 of 2003
- Regulation where the measure is specified
- ZS 437 Part 1 2002 Pneumatic Tyres – Specifications Part 1 Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- ZS 437 Part 1 2002 Pneumatic Tyres – Specifications Part 1 Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers
Covers new pneumatic tyres designed primarily, but not only, for vehicles in categories M1, O1 and O2. 1/
It does not apply to tyres designed for
(a) the equipment for vintage cars
(b) competitions.
Includes quality requirements, marking, testing and inspection - Reference of the measure
- Pages 12-22 of ZS 437 Part 1
- Measure also domestic
- No
Products affected by the measure.
- Description
- New pneumatic tyres designed primarily, but not only, for vehicles in categories M1, O1 and O2. 1/
It does not apply to tyres designed for
(a) the equipment for vintage cars
(b) competitions.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 18 July 2003
- Publication where the measure is specified
- Statutory Instrument No. 78 of 2003
- Regulation where the measure is specified
- ZS 437 Part 2 2002 Pneumatic tyres - Specifications
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- Covers new pneumatic tyres designed primarily, but not only, for vehicles in categories M2, M3, N and O3 and O4. ∗/ However, it does not apply to
tyre types identified by speed category symbols corresponding to speeds below
80 km/h.
Includes quality requirements, marking, testing and conformity assessment - Reference of the measure
- Pages 10, 15, 18 of ZS 437 Part 2
- Measure also domestic
- No
Products affected by the measure.
- Description
- New pneumatic tyres designed primarily, but not only, for vehicles in categories M2, M3, N and O3 and O4. ∗/ However, it does not apply to
tyre types identified by speed category symbols corresponding to speeds below
80 km/h.
assessment
Countries/Regions affected by the measure.
-
Applied by Zambia on the entire world
The measure came into effect on 18 July 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 18 July 2003
- Publication where the measure is specified
- Statutory Instrument No. 78 of 2003
- Regulation where the measure is specified
- ZS 437 Part 3 2002 Pneumatic tyres – Specifications
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- Applies to the production of retreaded tyres intended to be fitted to private (passenger) cars and their trailers used on the road.
It does not however apply to:
1.1. Retreaded tyres for commercial vehicles and their trailers.
1.2. Retreaded tyres with a speed capability below 120 km/h or above
240 km/h.
1.3. Tyres for cycles and motorcycles.
1.4. Tyres originally produced without speed symbols and load indices.
1.5. Tyres originally produced without type approval and without either an
"E" or "e" mark.
1.6. Tyres designed for the equipment of cars produced prior to 1939.
1.7. Tyres designed exclusively for competition or off road use and marked accordingly.
1.8. Tyres designated as "T type" temporary use spares.
Includes quality requirements, marking, testing and inspection - Reference of the measure
- Pages 12,16,24,26 of ZS 437 Part 3
- Measure also domestic
- No
Products affected by the measure.
- Description
- Retreaded tyres intended to be fitted to private (passenger) cars and their trailers used on the road.
It does not however apply to:
1.1. Retreaded tyres for commercial vehicles and their trailers.
1.2. Retreaded tyres with a speed capability below 120 km/h or above
240 km/h.
1.3. Tyres for cycles and motorcycles.
1.4. Tyres originally produced without speed symbols and load indices.
1.5. Tyres originally produced without type approval and without either an
"E" or "e" mark.
1.6. Tyres designed for the equipment of cars produced prior to 1939.
1.7. Tyres designed exclusively for competition or off road use and marked accordingly.
1.8. Tyres designated as "T type" temporary use spares.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 18 July 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 18 July 2003
- Publication where the measure is specified
- Statutory Instrument No. 78 of 2003
- Regulation where the measure is specified
- ZS 437 Part 4 2002 Pneumatic tyres – Specifications
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Applies to the production of retreaded tyres intended to be fitted to commercial vehicles and their trailers used on the road. It does not however apply to:
1.1. Retreaded tyres for private (passenger) cars and their trailers.
1.2. Retreaded tyres with a speed capability below 80 km/h.
1.3. Tyres for cycles and motorcycles.
1.4. Tyres originally produced without speed symbols and/or load indices.
1.5. Tyres originally produced without type approval and without either an
"E" or "e" mark.
Includes quality requirements, marking, testing and inspection - Reference of the measure
- Pages 12,16,24 of ZS 437 Part 4
- Measure also domestic
- No
Products affected by the measure.
- Description
- Retreaded tyres intended to be fitted to commercial vehicles and their trailers used on the road. It does not however apply to:
1.1. Retreaded tyres for private (passenger) cars and their trailers.
1.2. Retreaded tyres with a speed capability below 80 km/h.
1.3. Tyres for cycles and motorcycles.
1.4. Tyres originally produced without speed symbols and/or load indices.
1.5. Tyres originally produced without type approval and without either an
"E" or "e" mark.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 29 December 2006
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 29 December 2006
- Publication where the measure is specified
- Statutory Instrument No 120 of 2006
- Regulation where the measure is specified
- ZS 558 Part 3, 13A plugs, sockets, adaptors and connection units: Part 3. Specifications for adaptors
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- Specifies requirements for adaptors having insulating sleeves on the line and neutral plug pins and suitable for use with socket-outlets complying with ZS 558: Part 2, with particular reference to safety in normal use
Also covers quality requirements, inspection, marking, labelling and testing - Reference of the measure
- Page 5
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Adaptors having insulating sleeves on the line and neutral plug pins and suitable for use with socket-outlets complying with ZS 558: Part 2, with particular reference to safety in normal use
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 22 April 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 22 April 2003
- Publication where the measure is specified
- Statutory Instrument 43 of 2003
- Regulation where the measure is specified
- ZS 005: Lead acid starter batteries
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants, E: Protection of the environment and F: Protection of wild fauna and flora
- Description of the measure
- Lead acid starter batteries
Specifies characteristics of starter batteries and lays down acceptance test for the batteries.
Also covers quality, marking, testing and inspection requirements - Reference of the measure
- Page 2
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Lead acid starter batteries
Specifies characteristics of starter batteries and lays down acceptance test for the batteries.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Statutory Instrument 43 of 2003
- Regulation where the measure is specified
- ZS 056: Toilet soap - Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- Specifies requirements for toilet soap
Also covers quality requirements, labelling, inspection and testing, - Reference of the measure
- Page 3
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Requirements for toilet soap
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 19 November 2010
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 19 November 2010
- Publication where the measure is specified
- Statutory Instrument no. 102 of 2010
- Regulation where the measure is specified
- ZS 058: Laundry soap - Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- Prescribes requirements for laundry soaps of three types; pure, built and filled. It lists the fillers and builders that should be used in the later types.
Also covers quality requirements, packaging, labelling, inspection sampling and testing - Reference of the measure
- Page 5
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Prescribes requirements for laundry soaps of three types; pure, built and filled.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 31 May 2013
- Publication where the measure is specified
- Statutory Instrument No. 44 of 2013
- Regulation where the measure is specified
- ZS 071: School Chalks - Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- Specifies materials, size, mass free moisture and breaking strength of moulded white and coloured chalks, which are intended primarily for writing on chalk boards
Also covers quality requirements, packaging, marking, inspection, sampling and testing - Reference of the measure
- Page 3
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Specifies materials, size, mass free moisture and breaking strength of moulded white and coloured chalks, which are intended primarily for writing on chalk boards
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 19 November 2010
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 19 November 2010
- Publication where the measure is specified
- Statutory Instrument no. 102 of 2010
- Regulation where the measure is specified
- ZS 073 Part 1 1987 Industrial safety footwear. Part 1: Specification for leather protective and safety footwear for general and heavy duty use.
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- Industrial safety footwear. Part 1: Specification for leather protective and safety footwear for general and heavy duty use.
Specifies minimum requirements for industrial leather protective and safety footwear.
Also covers quality requirements, packaging, marking, inspection, sampling and testing - Reference of the measure
- Page 13
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Industrial safety footwear. Part 1: Specification for leather protective and safety footwear for general and heavy duty use.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 29 December 2006
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 29 December 2006
- Publication where the measure is specified
- Statutory Instrument No 120 of 2006
- Regulation where the measure is specified
- ZS 106 Part 1: Safety of household and similar electrical appliances - Specification
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals and E: Protection of the environment
- Description of the measure
- ZS 106 safety of household and similar electrical appliances – Specification
Part 1. General requirements
Deals with the safety of electrical appliances for household and similar purposes, the rated voltage of the appliances being not more than 250 V for single-phase appliances and 480 V for other appliances.
Appliances may incorporate motors, heating elements or their combination.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
Also covers inspection, testing, quality and marking requirements - Reference of the measure
- Page 10
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Safety of electrical appliances for household and similar purposes, the rated voltage of the appliances being not more than 250 V for single-phase appliances and 480 V for other appliances.
Appliances may incorporate motors, heating elements or their combination.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.
Also covers inspection, testing, quality and marking requirements
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 19 November 2010
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 19 November 2010
- Publication where the measure is specified
- Statutory Instrument no. 102 of 2010
- Regulation where the measure is specified
- ZS 189: Maize meal (Mealie meal)
- Country/Region applying the measure
- Zambia
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, E: Protection of the environment and G: Protection of national security
- Description of the measure
- ZS 189: Maize meal (Mealie meal)
Prescribes the requirements for three types of Maize Meal, namely; Maize Breakfast Meal, Maize Roller Meal and Whole Maize Meal for direct human consumption.
Also covers quality requirements, packaging, testing and inspection, hygiene, microbial and contaminants, - Reference of the measure
- Page 2
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Maize meal (Mealie meal)
Prescribes the requirements for three types of Maize Meal, namely; Maize Breakfast Meal, Maize Roller Meal and Whole Maize Meal for direct human consumption.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world
The measure came into effect on 16 September 2011
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 16 September 2011
- Publication where the measure is specified
- Statutory Instrument no. 104 of 2011
- Regulation where the measure is specified
- ZS 201: Specification for emulsion paints for interior and exterior use
- Country/Region applying the measure
- Zambia
- Description of the measure
- ZS 201: Emulsion paints for interior and exterior use - Specification
Specifies requirements for emulsion paints based on polymers, intended for brushing, spraying and roller applications for exterior and interior use.
Also covers quality requirements, packaging, marking testing and inspection - Reference of the measure
- Page 6
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Emulsion paints for interior and exterior use - Specification
Specifies requirements for emulsion paints based on polymers, intended for brushing, spraying and roller applications for exterior and interior use.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world for
The measure came into effect on 31 May 2013
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 31 May 2013
- Publication where the measure is specified
- The Law of Zambia; Republic of Zambia
- Regulation where the measure is specified
- Food and Drugs Act
- Country/Region applying the measure
- Zambia
- The rationale of the measure
- To compel manufacturers, traders and importers of various products that have a bearing on health, safety and other hazards
- Coded list of objectives
- B: Protection of life and health of animals
- Description of the measure
- Requirement for product inspection for both imports and locally manufactured school chalk
- Reference of the measure
- Page 3
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out PG: 44 Hazardous chemicals and pesticides No - Description
- School chalk
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world for
The measure came into effect on 22 April 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 22 April 2003
- Publication where the measure is specified
- Laws of Zambia
- Regulation where the measure is specified
- Food and Drugs Act
- Country/Region applying the measure
- Zambia
- The rationale of the measure
- To compel manufacturers, traders and importers of various products that have a bearing on health, safety and other hazards
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- ZS 017 POULTRY FEEDS – Specifications and Guidelines (Third Revision)
This Zambian Standard prescribes specifications for the following poultry feeds:-
a) Broiler feed
- broiler pre starter
- broiler starter
- broiler grower
- broiler finisher
- broiler post finisher
- broiler maintenance
b) Layer feed
- pullet starter
- pullet grower
- pullet developer
- complete laying mash (early phase)
- complete laying mash (late phase)
c) Turkey feed
- starter
- grower
- pullet developer
- finisher
- pre breeder
- breeder
d) Quail feed
- starter
- grower
- breeder - Reference of the measure
- Page 172 of Statutory Instruments No. 41 of 25th April 2003
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out PG: 4 Plants and plant products Yes - Description
- Poultry Feed
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world for
The measure came into effect on 02 May 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Laws of Zambia
- Regulation where the measure is specified
- Food and Drugs Act
- Country/Region applying the measure
- Zambia
- The rationale of the measure
- To compel manufacturers, traders and importers of various products that have a bearing on health, safety and other hazards
- Coded list of objectives
- B: Protection of life and health of animals
- Description of the measure
- ZS 018 PIG FEED - Specification (Third Revision)
This Zambian Standard prescribes specifications for the following pig feeds:-
Creep feed
Weaner feed
Grower feed
Finisher feed
Dry sow and boar feed
Lactating sow feed
This Standard for pig feed is designed to:
Ensure that pig livestock are fed rations which are appropriate for the life and production stage of the pigs fed;
Help ensure the safety of food for human consumption through good manufacturing practices during procurement, handling, storage, processing and distribution of pig feed and feed ingredients. - Reference of the measure
- Page 200 of Statutory Instruments No. 43 of 2nd May 2003
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out PG: 2 Agricultural products No - Description
- Pig Feed
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Food and Drugs Act
- Regulation where the measure is specified
- Food and Drugs Act
- Country/Region applying the measure
- Zambia
- The rationale of the measure
- To compel manufacturers, traders and importers of various products that have a bearing on health, safety and other hazards
- Coded list of objectives
- B: Protection of life and health of animals
- Description of the measure
- ZS 019 Ruminant Feeds - Specifications (First Revision)
This Zambian Standard prescribes specifications for the following ruminant feed categories:-
Milk Replacers / Sheep and Goat / Cattle / Dairy / Game
The specifications will in broad terms also be used as normative reference for the manufacture of feed and feeding of the Southern African herbivorous game species which are mostly ruminants (with the exception of zebra, elephant, rhinoceros, hippopotamus, bushpig and warthog which are not ruminants). Wild ruminant species in general will be fed similar to their domestic counter parts most similar in physiological stage and mature body weight. Where the wildlife ruminant feed, supplement or concentrate materially deviates from this standard sound scientific evidence of the contrary must be available at the point of manufacture.
This Standard for ruminant feed is designed to:
Ensure that ruminant livestock (Cattle, sheep and goat) and wildlife are fed rations which are appropriate for the life and production stage of the ruminants fed;
Help ensure the safety of food for human consumption through good manufacturing practices during procurement, handling, storage, processing and distribution of ruminant feed and feed ingredients. - Reference of the measure
- Page No. 188 of Statutory Instruments No. 43 of 2nd May 2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Ruminant Feeds
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world for
The measure came into effect on 02 May 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Laws of Zambia
- Regulation where the measure is specified
- Food and Drugs Act
- Country/Region applying the measure
- Zambia
- The rationale of the measure
- To compel manufacturers, traders and importers of various products that have a bearing on health, safety and other hazards
- Coded list of objectives
- A: Protection of human life and health, B: Protection of life and health of animals, C: Protection of life and health of plants and E: Protection of the environment
- Description of the measure
- ZS 056TOILET SOAP - Specification
This Zambian Standard specifies the requirements and corresponding test methods for toilet soap. - Reference of the measure
- Page No. 219 of Statutory Instruments No. 43 of 2nd May 2003
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out PG: 22 Cosmetics No - Description
- Toilet Soap
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Laws of Zambia
- Regulation where the measure is specified
- Food and Drugs Act
- Country/Region applying the measure
- Zambia
- The rationale of the measure
- To compel manufacturers, traders and importers of various products that have a bearing on health, safety and other hazards
- Coded list of objectives
- A: Protection of human life and health, C: Protection of life and health of plants, E: Protection of the environment and H: Protection of public morals
- Description of the measure
- ZS 430 CLEAR BEER - Specification
This Standard prescribes the requirements for clear beer. - Reference of the measure
- Page No. 179 of Statutory Instruments No. 43 of 2nd May 2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Clear Beer
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world -
Applied by Zambia on the entire world for
The measure came into effect on 02 May 2003
Non-Tariff Measure
- NTM classification
- B84: Inspection requirement
- Date when the measure came into force
- 02 May 2003
- Publication where the measure is specified
- Laws of Zambia
- Regulation where the measure is specified
- Food and Drugs Act
- Country/Region applying the measure
- Zambia
- The rationale of the measure
- To compel manufacturers, traders and importers of various products that have a bearing on health, safety and other hazards
- Coded list of objectives
- A: Protection of human life and health and E: Protection of the environment
- Description of the measure
- ZS 438 BISCUITS – Specification
This Zambian Standard prescribes the essential requirements and methods of sampling and tests for biscuits baked from dough made from essential materials specified under 2 and with or without the addition of other ingredients specified in clause 3. - Reference of the measure
- Page No. 185 of Statutory Instruments No. 43 of 2nd May 2003
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out PG: 7 Food products No - Description
- Buscuits
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world
B84: Inspection requirement
