English
FrançaisNon-tariff Measures
Showing items 4721 to 4740 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 284:1971 (Revision in 2010), Standard for Whey Cheeses
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to all products intended for direct consumption or further processing.
- Reference of the measure
- US CODEX STAN 284:1971
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Whey Cheeses
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 288:1976 (Revision in 2010), Standard for Cream and Prepared Creams
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to cream and prepared creams for direct consumption or further processing
- Reference of the measure
- US CODEX STAN 288
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cream
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US 1628:2016, Sesame – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements,for sesame (Sesamun indicum.L.) for human consumption.
- Reference of the measure
- US 1628:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- sesame
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US 1636:2016, Shea nut – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for shea nut/kernel originating from fruits of the tree Vitellaria paradoxa Cf Gaertn of the family Sapotaceae which is processed into fat/oil and other products destined for human use.
- Reference of the measure
- US 1636:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- shea nut/kernel
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US 1635 2016, Shea butter – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for shea butter Vitellaria paradoxa derived from the kernels of the nut of Vitellaria paradoxa
- Reference of the measure
- US 1635 2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Shea butter
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US CODEX STAN 318:2014, Standard for Okra
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to commercial varieties of okra grown from varieties of Abelmoschus esculentus (L.) Moench (syn. Hibiscus esculentus L.) of the Malvaceae family, to be supplied fresh to the consumer after preparation and packaging.
- Reference of the measure
- US CODEX STAN 318:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Okra
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 959-2:1998, Pepper (Piper nigrum L.), whole or ground – Specification – Part 2: White pepper
- Country/Region applying the measure
- Uganda
- Description of the measure
- This part of Uganda Standard specifies requirements for white pepper (Piper nigrum L.), whole or ground, at the following commercial stages: a) semi-processed (SP); b) processed (P). It is not applicable to white pepper categories called "light".
- Reference of the measure
- US ISO 959-2:1998
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- white pepper
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 972:1997, Chillies and capsicums, whole or ground (powdered) – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for chillies and capsicums in the whole or ground (powdered) form. It does not apply to “chili powder” and paprika
- Reference of the measure
- US ISO 972:1997
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- chillies and capsicums
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 973:1999, Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for pimento or allspice [Pimentadioica (L.) Merr.], whole or ground.
- Reference of the measure
- US ISO 973:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pimento or allspice
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 3632-1:2011, Spices – Saffron (Crocus sativus L.) – Part 1: Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard establishes specifications for dried saffron obtained from the pistils of Crocus sativus L. flowers.
- Reference of the measure
- US ISO 3632-1:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- saffron
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6465:2009, Spices – Cumin (Cuminum cyminum L.) – Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for fruits of cumin (Cuminum cyminum L.). (This Uganda Standard cancels and replaces US ISO 6465:1984, Whole cumin (Cuminurn cyminum Linnaeus) — Specification which has been technically revised).
- Reference of the measure
- US ISO 6465:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- cumin
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6539:2014, Cinnamon (Cinnamomum zeylanicum Blume) – Specification (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for whole or ground (powdered) cinnamon, of the Sri Lankan, Madagascan and Seychelles types obtained from the bark of the tree or shrub Cinnamomum zeylanicum Blume. (This Uganda Standard cancels and replaces US ISO 6539:1997, Cinnamon, Sri Lankan type, Seychelles type and Madagascan type (Cinnamomum zeylanicum Blume) — Specification which has been technically revised.)
- Reference of the measure
- US ISO 6539:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- cinnamon
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 11178:1995, Star anise (Illicium verum Hook. f.) – Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for the dried fruits of the star anise tree (Illicium verum Hook. f.).
- Reference of the measure
- US ISO 11178:1995
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- star anise
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6361-2:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy sheets, strips, and plates for general engineering applications. It applies to flat-rolled products.
- Reference of the measure
- US ISO 6361-2:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy sheets, strips, and plates
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6361-3:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 3: Strips: Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy strip by cold-rolling for general engineering applications. It applies to products with thickness of over 0.15 mm up to, and including 16 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock), or to special products such as those that are corrugated or embossed.
- Reference of the measure
- US ISO 6361-3:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy strip
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6361-4:2014, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 4: Sheets and plates: Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on shape and dimensions for wrought aluminium and aluminium alloy sheet and plate by hot-rolling or cold-rolling for general engineering applications. It applies to products with a thickness over 0,15 mm up to and including 203 mm. It does not apply to semi-finished rolled products in coiled form to be subjected to further rolling (reroll stock) or to special products, such as those that are corrugated or embossed.
- Reference of the measure
- US ISO 6361-4:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy sheet and plate
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6361-5:2011, Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 5: Chemical composition
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the chemical composition of wrought aluminium and aluminium alloys.
- Reference of the measure
- US ISO 6361-5:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloys
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-2:2014, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the mechanical properties of wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles for general engineering applications. It applies to extruded products.
- Reference of the measure
- US ISO 6362-2:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy extruded rods/bars, tubes, and profiles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-3:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It applies to extruded rectangular bars.
- Reference of the measure
- US ISO 6362-3:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy extruded rectangular bars
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 6362-4:2016, Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded profiles with a cross-section contained within a circumscribing circle not greater than 800 mm. This part of US ISO 6362 applies to extruded profiles for general engineering applications only.
- Reference of the measure
- US ISO 6362-4:2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- wrought aluminium and aluminium alloy extruded profiles
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
