English
FrançaisNon-tariff Measures
Showing items 4761 to 4780 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60095-2:2009, Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lead-acid batteries used for starting, lighting and ignition of passenger cars and light vehicles with a nominal voltage of 12 V.
- Reference of the measure
- US IEC 60095-2:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- lead-acid batteries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60076-1:2011, Power transformers — Part 1: General
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as: single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA; transformers, which have no windings with rated voltage higher than 1 000 V; instrument transformers; amongst others.
- Reference of the measure
- US IEC 60076-1:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- power transformers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60076-5:2006, Power transformers — Part 5: Ability to withstand short circuit
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard identifies the requirements for power transformers to sustain without damage the effects of overcurrent originated by external short circuits. It describes the calculation procedures used to demonstrate the thermal ability of a power transformer to withstand such over currents and both the special test and the theoretical evaluation method used to demonstrate the ability to withstand the relevant dynamic effects. The requirements apply to transformers as defined in the scope of US IEC 60076-1.
- Reference of the measure
- US IEC 60076-5:2006
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- power transformers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60282-1:2014, High-voltage fuses — Part 1: Current-limiting fuses
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to all types of high-voltage current-limiting fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz and of rated voltages exceeding 1 000 V.
- Reference of the measure
- US IEC 60282-1:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fuses
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US IEC 60282-2:2008, High-voltage fuses — Part 2: Expulsion fuses
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for expulsion fuses designed for use outdoors or indoors on alternating current systems of 50 Hz and 60 Hz, and of rated voltages exceeding 1 000 V. This standard covers only the performance of fuses, each one comprising a specified combination of fuse-base, fuse-carrier and fuse-link which have been tested in accordance with this standard; successful performance of other combinations cannot be implied from this standard.
- Reference of the measure
- US IEC 60282-2:2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fuses
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US EAS 127-2:2014, Synthetic detergent powders — Specification — Part 2: Machine wash
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for synthetic detergents for machine wash. It does not cover hand wash powders and industrial detergent powders.
- Reference of the measure
- US EAS 127-2:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- synthetic detergent powders for machine wash
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US EAS 812-1:2015, Liquid hand wash — Specification — Part 1: Synthetic and combined (soap and synthetic) hand wash
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for synthetic and combined (soap and synthetic) hand wash. This standard does not apply to soap-based hand wash.
- Reference of the measure
- US EAS 812-1:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- hand wash
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US EAS 815: 2015, Soap noodles — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for soap noodles used as an intermediate product for subsequent conversion into a marketable soap.
- Reference of the measure
- US EAS 815: 2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- soap noodles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US EAS 816-1: 2015, Synthetic liquid laundry detergents — Specification — Part 1: Hand wash
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for hand wash synthetic liquid laundry detergents.
- Reference of the measure
- US EAS 816-1: 2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- hand wash synthetic liquid laundry detergents.
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US EAS 816-2:2015, Synthetic liquid laundry detergents — Specification — Part 2: Machine wash
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for machine wash synthetic liquid laundry detergents.
- Reference of the measure
- US EAS 816-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- machine wash synthetic liquid laundry detergents
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US EAS 817:2015, Stain remover for tableware — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for a stain remover used in hard or soft water to remove coffee, tea and other adsorbed food stains, primarily from plastic tableware, by immersion.
- Reference of the measure
- US EAS 817:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Stain remover for tableware
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US 191: 2016 Petroleum jelly — Specification (3rd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for petroleum jelly for cosmetic use.
- Reference of the measure
- US 191: 2016
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- petroleum jelly
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 10333-1:2000, Personal fall-arrest systems — Part 1: Full-body harnesses
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for maintenance for full-body harnesses (FBH). The main purpose of a FBH is to allow the user to connect into a personal fall-arrest system (PFAS), which will be specified in a future International Standard (see US ISO 10333-6 in the Bibliography), such that if an arrest takes place, the arresting force will not exceed 6 kN.
- Reference of the measure
- US ISO 10333-1:2000
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- PPE-Personal fall-arrest systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 11611:2015, Protective clothing for use in welding and allied processes (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum basic safety requirements for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks.
- Reference of the measure
- US ISO 11611:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Protective clothing
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 11612:2015, Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies performance requirements for protective clothing made from flexible materials, which are designed to protect the wearer's body, except the hands, from heat and/or flame. For protection of the wearer's head and feet, the only items of protective clothing falling within the scope of this standard are gaiters, hoods, and over boots. However, concerning hoods, requirements for visors and respiratory equipment are not given. The performance requirements set out in this standard are applicable to protective clothing which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes.
- Reference of the measure
- US ISO 11612:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- PPE-protective clothing
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 12609-1:2013, Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 1: Specification for products
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies performance and labelling of eye protectors used for ILS equipment used on humans and animals for cosmetic and medical applications against excessive exposure to optical radiation in the spectral range 250 nm to 3 000 nm, with the exception of laser radiation.
- Reference of the measure
- US ISO 12609-1:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- PPE-eye protectors
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO 13688:2013, Protective clothing -- General requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies general performance requirements for ergonomics, innocuousness, size designation, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing. US ISO 13688:2012 is only intended to be used in combination with other standards containing requirements for specific protective performance and not on a stand-alone basis
- Reference of the measure
- US ISO 13688:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- PPE-Protective clothing
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO/TS 16976-1:2015, Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory flow rates
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This part of US ISO/TS 16976 contains information related to respiratory and metabolic responses to rest and work at various intensities. Information is provided for the following: metabolic rates associated with various intensities of work;
oxygen consumption as a function of metabolic rate and minute ventilation for persons representing three body sizes;
peak inspiratory flow rates during conditions of speech and no speech for persons representing three body sizes as a function of metabolic rates. - Reference of the measure
- US ISO/TS 16976-1:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Respiratory protective devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO/TS 16976-2:2015, Respiratory protective devices — Human factors — Part 2: Anthropometrics
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for design, testing, and use of respiratory protective devices. It contains information related to anthropometry. In particular, information is given for:
anthropometric measurement methods;
anthropometric data for head, face, and neck dimensions;
anthropometric data for torso dimensions;
human test panels;
models of headforms - Reference of the measure
- US ISO/TS 16976-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Respiratory protective devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 12 August 2016
- Publication where the measure is specified
- The Uganda Gazette Vol. CVIII No. 57
- Regulation where the measure is specified
- US ISO/TS 16976-5:2013, Respiratory protective devices — Human factors — Part 5: Thermal effects
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design, testing and use of respiratory protective devices. It contains information related to thermal effects of respiratory protective devices on the human body, in particular: temperatures of surfaces associated with discomfort sensation and harmful effects on human tissues; thermal effects of breathing gas temperatures on lung airways and tissues; effects of breathing gas temperature and humidity on respiratory heat exchange; effects of respiratory protective devices on overall body heat exchange. The information represents data for adult healthy men and women aged between 20 and 60 years.
- Reference of the measure
- US ISO/TS 16976-5:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Respiratory protective devices
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
