English
FrançaisNon-tariff Measures
Showing items 4981 to 5000 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-1:2015, Cycles — Lighting and retroreflective devices — Part 1:Lighting and light signalling devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting devices used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies the functions, safety requirements, photometric performance and test methods of lighting and signalling devices that can be used on cycles.
- Reference of the measure
- US ISO 6742-1:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Lighting and retroreflective devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-2:2015, Cycles — Lighting and retroreflective devices — Part 2:Retroreflective devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies photometric and physical requirements of retro-reflective devices.
- Reference of the measure
- US ISO 6742-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Lighting and retroreflective devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-3:2015, Cycles — Lighting and retroreflective devices — Part 3:Installation and use of lighting and retro-reflective devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting and retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies the safety requirements and test methods of lighting and retro-reflective devices for fastening devices, control, (guidelines for maintenance), instructions for mounting and use.
- Reference of the measure
- US ISO 6742-3:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Lighting and retroreflective devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-4:2015, Cycles — Lighting and retroreflective devices — Part 4: Lighting systems powered by the cycle’s movement
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems powered by the cycle’s movement. It applies to light devices complying with US ISO 6742-1. Lighting systems include lighting devices and power supplied by cycle's movement such as generator.
- Reference of the measure
- US ISO 6742-4:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- cycles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 6742-5:2015, Cycles — Lighting and retroreflective devices — Part 5: Lighting systems not powered by the cycle’s movement
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to lighting systems used on cycles intended to be used on public roads and, especially, bicycles complying with US ISO 4210 and US ISO 8098. This part of US ISO 6742 specifies requirements and test methods for the performance of lighting systems not powered by the cycle’s movement. It applies to light devices complying with ISO 6742-1. Lighting systems include lighting devices and power not supplied by cycle’s movement such as battery.
- Reference of the measure
- US ISO 6742-5:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10427-1:2001, Petroleum and natural gas industries — Equipment for well cementing — Part 1: Casing bow-spring centralizers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides minimum performance requirements, test procedures and marking requirements for casing bow-spring centralizers for the petroleum and natural gas industries. The procedures provide verification testing for the manufacturer’s design, materials and process specifications, and periodic testing to confirm the consistency of product performance.
- Reference of the measure
- US ISO 10427-1:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Equipment for well cementing for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10431:1993, Petroleum and natural gas industries — Pumping units — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard lays down specification covering the design and rating of pumping units.
- Reference of the measure
- US ISO 10431:1993
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pumping units for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-1:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies general requirements for lubrication systems, oil-type shaft-sealing systems, dry-gas face-type shaft-sealing systems and control-oil systems for general- or special-purpose applications. General-purpose applications are limited to lubrication systems. These systems can serve equipment such as compressors, gears, pumps and drivers. This part of US ISO 10438 is intended to be used in conjunction with US ISO 10438-2, US ISO 10438-3 or US ISO 10438-4, as appropriate.
- Reference of the measure
- US ISO 10438-1:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- shaft-sealing and control-oil systems and auxiliaries for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-2:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard, in conjunction with of US ISO 10438-1, specifies requirements for oil systems for special purpose applications. These oil systems can provide lubrication oil, seal oil or both. These systems can serve equipment such as compressors, gears, pumps and drivers.
- Reference of the measure
- US ISO 10438-2:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- oil systems for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-3:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 3: General-purpose oil systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard, in conjunction with US ISO 10438-1, specifies requirements for oil systems for general purpose applications. These oil systems can provide lubrication oil, but not seal oil and can serve equipment such as compressors, gears, pumps.
- Reference of the measure
- US ISO 10438-3:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- oil systems for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10438-4:2007, Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 4:Self-acting gas seal support systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard in conjunction with US ISO 10438-1 specifies requirements for support systems for self-acting gas seals (dry gas seals), for example as described in ISO 10439 and ISO 10440-1. These systems can serve equipment such as compressors, gears, pumps and drivers.
- Reference of the measure
- US ISO 10438-4:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Self-acting gas seal support systems for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10439-2:2015, Petroleum, chemical and gas service industries ⎯ Axial and centrifugal compressors and expander compressors ⎯ Part 2: Non-integrally geared centrifugal and axial compressors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft, and integrally geared process centrifugal compressors and expander-compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies requirements for non-integrally geared centrifugal and axial compressors, in addition to the general requirements specified in US ISO 10439-1. These machines do not have gears integral with their casing but can have external gears.
- Reference of the measure
- US ISO 10439-2:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Axial and centrifugal compressors and expander compressors for Petroleum, chemical and gas service industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10439-3:2015, Petroleum, chemical and natural gas service industries — Axial and centrifugal compressors and expander compressors — Part 3: Integrally geared centrifugal compressors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum requirements and gives recommendations for axial compressors, single-shaft and integrally geared process centrifugal compressors, and expander compressors for special purpose applications that handle gas or process air in the petroleum, petrochemical, and natural gas industries. This part of US ISO 10439 specifies integrally geared centrifugal compressors in conjunction with US ISO 10439‑1.
- Reference of the measure
- US ISO 10439-3:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Axial and centrifugal compressors and expander compressors for Petroleum, chemical and natural gas service industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13623: 2009, Petroleum and natural gas industries — Pipeline transportation systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and gives recommendations for the design, materials, construction, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.
- Reference of the measure
- US ISO 13623: 2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pipeline transportation systems for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13680:2010, Petroleum and natural gas industries — Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock — Technical delivery conditions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the technical delivery conditions for corrosion-resistant alloy seamless tubulars for casing, tubing and coupling stock.
- Reference of the measure
- US ISO 13680:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13706:2011, Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives requirements and recommendations for the design, materials, fabrication, and preparation for shipment of air-cooled heat exchangers for use in the petroleum, petrochemical and natural gas industries. This standard is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.
- Reference of the measure
- US ISO 13706:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Air-cooled heat exchangers for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13707:2000, Petroleum and natural gas industries ⎯ Reciprocating compressors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard covers the minimum requirements for reciprocating compressors and their drivers used in the petroleum and natural gas industries with either lubricated or no lubricated cylinders.
- Reference of the measure
- US ISO 13707:2000
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Reciprocating compressors for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13709:2009, Centrifugal pumps for petroleum, petrochemical and natural gas industries
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for centrifugal pumps, including pumps running in reverse as hydraulic power recovery turbines, for use in petroleum, petrochemical and gas industry process services. This standard is applicable to overhung pumps, between-bearings pumps and vertically suspended pumps. Clause 9 provides requirements applicable to specific types of pump. All other clauses of this standard are applicable to all pump types. Illustrations are provided of the various specific pump types and the designations assigned to a specific type.
- Reference of the measure
- US ISO 13709:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Centrifugal pumps for petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13710: 2004, Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for reciprocating positive-displacement pumps and pump units for use in the petroleum, petrochemical and natural gas industries. It is applicable to both direct-acting and power-frame types.
- Reference of the measure
- US ISO 13710: 2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Reciprocating positive displacement pumps for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 15136-1: 2009, Petroleum and natural gas industries —Progressing cavity pump systems for artificial lift —Part 1: Pumps
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of progressing cavity pumps for use in the petroleum and natural gas industry. This part of US ISO 15136 is applicable to those products meeting the definition of progressing cavity pumps (PCP) included herein. Connections to the drive string and tubulars are not covered by this part of US ISO 15136.
- Reference of the measure
- US ISO 15136-1: 2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pumps for Petroleum and natural gas industries
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
