English
FrançaisNon-tariff Measures
Showing items 5001 to 5020 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- 1128. US ISO 15136-2: 2006, Petroleum and natural gas industries —Progressing cavity pump systems for artificial lift —Part 2: Surface-drive systems
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings and repair of progressing cavity pump surface-drive systems for use in the petroleum and natural gas industry. This part of US ISO 15136 is applicable to those products meeting the definition of surface-drive systems. Additionally, informative annexes provide information on brake system selection, installation, and operation; and sucker rod selection and use.
- Reference of the measure
- US ISO 15136-2: 2006
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Surface-drive systems for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 15590-3:2004, Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard applies to weldneck and blind flanges (full face, raised face, and RTJ groove) as well as anchor, swivel-ring flanges and orifice flanges. This part of US ISO 15590 specifies the technical requirements for carbon steel and low-alloy steel forged flanges for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. This part of US ISO 15590 designates those categories of flanges that meet the industry’s need to match ISO 3183 pipe. These flanges are for normal and low-temperature service and include supplementary requirements where required for sour service.
- Reference of the measure
- US ISO 15590-3:2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Flanges for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 16812:2007, Petroleum, petrochemical and natural gas industries — Shell and-tube heat exchangers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries. This standard is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers. This standard is not applicable to vacuum-operated steam surface condensers and feed-water heaters.
- Reference of the measure
- US ISO 16812:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Shell and-tube heat exchangers for Petroleum, petrochemical and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 21809-1:2011, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements of plant-applied external three-layer polyethylene- and polypropylene-based coatings for corrosion protection of welded and seamless steel pipes for pipeline transportation systems in the petroleum and natural gas industries in accordance with US ISO 13623.
- Reference of the measure
- US ISO 21809-1:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Polyolefin coatings (3-layer PE and 3-layer PP) for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 21809-2:2014, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for qualification, application, of materials for plant application of single layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623.
- Reference of the measure
- US ISO 21809-2:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pipeline transportation systems for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 21809-3:2011, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for field joint coating of seamless or welded steel pipes for pipeline transportation systems in the petroleum and natural gas industries as defined in US ISO 13623. This part of US ISO 21809 specifies the qualification, application and testing of the corrosion protection coatings applied to steel surfaces left bare after the pipes and fittings (components) are joined by welding. This part of US ISO 21809 does not address additional mechanical protection, thermal insulation or joint infills for concrete weight-coated pipes. This part of US ISO 21809 defines and codifies the different types of field joint coatings for buried or submerged pipelines.
- Reference of the measure
- US ISO 21809-3:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pipeline transportation systems for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 21809-4:2009, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for qualification, of materials for plant application of two-layer polyethylene coatings (2-layer PE) applied externally for the corrosion protection of bare steel pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623.
- Reference of the measure
- US ISO 21809-4:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pipeline transportation systems for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 21809-5:2010, Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for qualification, application, testing and handling of materials required for the application of reinforced concrete coating externally to either bare pipe or pre-coated pipe for use in pipeline transportation systems for the petroleum and natural gas industries as defined in US ISO 13623. The external application of concrete is primarily used for the negative buoyancy of pipes used in buried or submerged pipeline systems and/or for the mechanical protection of the pipe and its pre-coating. This part of US ISO 21809 is applicable to concrete thicknesses of 25 mm or greater.
- Reference of the measure
- US ISO 21809-5:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- pipeline transportation systems for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 11960:2014, Petroleum and natural gas industries — Steel pipes for use as casing or tubing for wells
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3).
- Reference of the measure
- US ISO 11960:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Steel pipes for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 11961:2008, Petroleum and natural gas industries — Steel drill pipe
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3).
- Reference of the measure
- US ISO 11961:2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Steel drill pipe for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 10426-1:2009, Petroleum and natural gas industries — Cements and materials for well cementing — Part 1: Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and gives recommendations for six classes of well cements, including their chemical and physical requirements and procedures for physical testing
- Reference of the measure
- US ISO 10426-1:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cements for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 13533:2001, Petroleum and natural gas industries — Drilling and production equipment — Drillthrough equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for performance, design, materials, testing and inspection, welding, marking, handling, storing and shipping of drill-through equipment used for drilling for oil and gas. It also defines service conditions in terms of pressure, temperature and wellbore fluids for which the equipment will be designed.
- Reference of the measure
- US ISO 13533:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Drillthrough equipment for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 December 2015
- Publication where the measure is specified
- The Uganda Gazette 22 January 2016: General Notice No. 45 of 2016
- Regulation where the measure is specified
- US ISO 14693:2003, Petroleum and natural gas industries — Drilling and wellservicing equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard provides general principles and specifies requirements for design, manufacture and testing of new drilling and well-servicing equipment and of replacement primary load-carrying components manufactured subsequent to the publication of this standard
- Reference of the measure
- US ISO 14693:2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Drilling and wellservicing equipment for Petroleum and natural gas industries
Countries/Regions affected by the measure.
-
Applied by South Africa on the entire world for 1007: Grain sorghum.
The measure came into effect on 05 May 2008
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 May 2008
- Publication where the measure is specified
- 4 No.31042 GOVERNMENT GAZETTE, 16 MAY2008
- Regulation where the measure is specified
- AGRICULTURAL PRODUCT STANDARDS ACT, 1990 (ACT No. 119 OF 1990)
- Country/Region applying the measure
- South Africa
- Coded list of objectives
- A: Protection of human life and health
- Description of the measure
- Restriction on sale of sorghum
2. (1) No person shall sell a consignment of sorghum in the Republic of South Africa;
(a) unless the sorghum is sold according to the classes set out in regulation3;
(b) unless the sorghum complies with the standards for the class concerned asset out in regulation4;
(c) unless the sorghum complies with the grades of sorghum and the standards for grades set out in regulations 5 and 6respectively;
(d) unless the sorghum is packed in accordance with the packing requirements set out in regulation 7;
(e) unless the containers or sale documents, as the case may be, are marked in accordance with the marking requirements set out in regulation 8;and
(f) if such sorghum contains a substance that renders it unfit for human
consumption or for processing into or utilization thereof as food or feed.
(2) The Executive Officer may grant written exemption,entirely or partially,to any person on such conditions as he or she may deem necessary, from the provisions of sub regulation(1).
QUALITY STANDARDS
Classes of sorghum
3. Sorghum shall be classified as:
(a) Class GM;
(b) Class GL;
(c) Class GH;and
(d) Class Other.
Standards for classes
4. (1) A consignment of sorghum shall be classified as Class GM Sorghum if it;
(a) consists of malt sorghum that does not have a dark testa;
(b) is of a GM cultivar as specified in the cultivar list;and
(c) complies with the standards for the grade of Class GM sorghum as set out in regulation6.
(2) A consignment of sorghum shall be classified as Class GL sorghum if it;
(a) consists of sorghum that does not have a dark testa;
(b) is of a GL cultivar as specified in the cultivar list;and
(c) complies with the standards for one of the grades of Class GL sorghum as set out in regulation6.
(3) A consignment of sorghum shall be classified as Class GH sorghum if it;
(a) consists of malt sorghum that has a dark testa;
(b) is of a GH cultivar as specified in the cultivar list;and
(c) complies with the standards for grades for Class GH Sorghum as set out in regulation 6.
(4) A consignment of sorghum shall be classified as Class Other if it does not comply with the standards for Class GM, GL and GH Sorghum
Grades of sorghum
5.(a) Class GM (i) Grade GM1
(ii) Grade GM2
(b) Class GL (i) Grade GL1
(ii) Grade GL2
(c) Class GH (i) Grade GH1
(ii)Grade GH2
(d) No grades are determined for Class Other sorghum.
Standards for grades
6.(1) All grades of sorghum shall;
(a) be free from black smearing as a result of smut;
(b) not contain10 or more smut balls or portions of smut balls which are collectively equivalent to 10 or more smut balls, per 100g of sorghum;
(c) be free from amusty,sour or other undesirable smell;
(d) be free from any substance that renders it unsuitable for human consumption or animal consumption or for processing in to or utilization thereof as food or feed;
(e)contain no more poisonous seeds than permitted in terms of the Foodstuffs, Cosmetic sand Disinfectants Act,1972 (Act No.54of1972);
(f) with the exception of Class Other, be free from insects; and
(g) with the exception of Class Other,have a moisture content of not more than14 percent.
(2) Grades GM1,GM2,GL1,GL2,GH1 and GH2shall not exceed the permissible deviations specified in columns2,3,4,5,6 and7 of the Table in the Annexure,respectively,with regard to the nature of deviation specified in column1of the said table.
(3) The presence of purple an thocyanic blotches in or on the pericarp shall not be taken into consideration when determining the grade of a consignment of sorghum. - Reference of the measure
- Section 2 & part I section 3-6
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 1007 Grain sorghum. No - Description
- sorghum
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 16 May 2008 - Description
- All countries
-
Applied by South Africa on the entire world for 0401: Milk and cream, not concentrated nor containing added sugar or other sweetening matter., 0402: Milk and cream, concentrated or containing added sugar or other sweetening matter. and 0403: Buttermilk, curdled milk and cream, yogurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa
The measure came into effect on 23 November 2012
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 23 November 2012
- Publication where the measure is specified
- GOVERNMENTNOTICES GOEWERMENTSKENNISGEWINGS 23 November 2012
- Regulation where the measure is specified
- FOODSTUFFS, COSMETICS AND DISINFECTANTS ACT, 1972 (ACT NO 54 OF 1972) REGULATIONS RELATING TO HYGIENE REQUIREMENTS FOR MILKING SHEDS, THE TRANSPORT OF MILK AND RELATED MATTERS
- Country/Region applying the measure
- South Africa
- Coded list of objectives
- A: Protection of human life and health
- Description of the measure
- (3) A bulk farm tank shall –
(a) be designed, constructed or manufactured in such a way that it-
(i) has a drainage incline leading directly to the outlet point;
(ii) is fitted with an outlet pipe made or manufactured and fitted in a way that all liquid can drain out of such tank, and the end of such outlet pipe shall be screw-threaded and fitted with a screw-on cap permitting such end to be shut off;
(iii) is fitted with an automatic operated stirring mechanism capable, within five minutes of being put into operation, mixing the milk in such a tank;
(iv) is fitted with a thermometer capable of measuring the temperature of the milk in such tank accurately to the nearest two degrees Celsius;
(v) is equipped to cool the milk in such tank to five degrees Celsius or lower temperature within three hours, and, capable of keeping such cooled milk at a required temperature of between one and five degrees Celsius effectively;
(vi) is installed at a minimum distance of 0,5 meters from any roof, ceiling or wall to effectively keep the milk cool;
(vii) is insulated in such a way that when no cooling takes place, the temperature of the milk in such tank shall not increase by more than 3 degrees Celsius in 12 hours if the surrounding temperature is 32 degrees Celsius;
(b) comply mutates mutandis with the provisions of sub-regulation(1)(a), (b), (c) and (d);
(c) be able to allow for maintenance, cleaning, disinfection,monitoring, and, to facilitate inspection.
(4) The tank of a milk tanker shall –
(a) be designed, constructed and installed in such a way that:
(i) it has an incline leading and to the outlet so that the total contents of such tank can drain out of the tank through the outlet pipe while the vehicle itself is in a horizontal position;
(ii) is insulated in such a way that the temperature of the milk in such tank shall not increase by more than two degrees Celsius every 48 hours;
(iii) it has at least one opening fitted with dust-proof lid through which the inside of such tank can be inspected and shall be equipped so that all surfaces that come into contact with milk can be adequately cleaned, disinfected as prescribed in sub- regulation (6);
(c) comply mutatis mutandis with the provisions of sub-regulation (1)(a), (b), (c), (d) and (3)(c) - Reference of the measure
- Section 7 (3-4)
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 0401 Milk and cream, not concentrated nor containing added sugar or other sweetening matter. Yes milk 0402 Milk and cream, concentrated or containing added sugar or other sweetening matter. Yes milk 0403 Buttermilk, curdled milk and cream, yogurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa Yes milk - Description
- Milk
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 23 November 2012 - Description
- All countries
-
Applied by South Africa on the entire world for 15: Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes
The measure came into effect on 08 August 1996
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 08 August 1996
- Publication where the measure is specified
- FOODSTUFFS, COSMETICS AND DISINFECTANTS
- Regulation where the measure is specified
- FOODSTUFFS, COSMETICS AND DISINFECTANTS ACT, 1972 (ACT NO 54 OF 1972) REGULATIONS RELATING TO EDIBLE FATS AND OILS
- Country/Region applying the measure
- South Africa
- Coded list of objectives
- A: Protection of human life and health
- Description of the measure
- 2. Special provisions
(1) These regulations shall apply to edible fats and oils and mixtures thereof which are intended for final consumption, including catering purposes, or which are used as medium of cooking or as ingredients in the manufacture of foodstuffs.
(4) The standards for the purity and composition of edible fats and oils shall be (if any) those laid down in the latest edition of the Codex Alimentarius Standards for Fats and Oils or the British Pharmacopoeia - Reference of the measure
- Section 2(4)
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 15 Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animal or vegetable waxes Yes edible fats and oils - Description
- edible fats and oils
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 08 August 1996 - Description
- All countries
-
Applied by South Africa on the entire world for 1101: Wheat or meslin flour., 1103.11: -- Of wheat and 1103.20.10: -- Of wheat
The measure came into effect on 15 March 1991
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 15 March 1991
- Publication where the measure is specified
- GOVERNMENT GAZETTE, 15 March 1991
- Regulation where the measure is specified
- MARKETING OF AGRICULTURAL PRODUCTS ACT, 168 (ACT NO. 59 OF 1968); Prohibition on the sale of wheaten products
- Country/Region applying the measure
- South Africa
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- I Jacob de Millers Minister of Agriculture acting under section 84 of the marketing Act, 1968 ( act No.59 of 1968, here by-
(a) declare that no person shall sell any wheaten products as defined in the said Act, in the republic-
(i) Unless the wheaten product is sold according to such classes as may be prescribed in respect thereof by regulation under section 89 of the said Act and specified in the schedule hereto.
(ii)Unless the wheaten product concerned complies with the standard thus prescribed for the composition thereof and contains the ingredients and other substances which is shall contain
(ii) Unless wheaten product concerned is marked with particulars in a manner thus prescribed.
Classes of wheaten products
1 White wheaten flour
2 Wheaten Meal
(a) Brown wheaten meal
(b) whole Meal
3 wheaten bran
4 wheaten bread
(a) White bread
(b)brown bread
(c) whole white bread - Reference of the measure
- No R 576
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 1101 Wheat or meslin flour. No 1103.11 -- Of wheat No 1103.20.10 -- Of wheat No - Description
- Wheaten Products
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world 15 March 1991 - Description
- All countries
-
Applied by South Africa on the entire world for 2006.00.90: - Other and 2008.99.90: --- Other
The measure came into effect on 18 May 2005
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 18 May 2005
- Publication where the measure is specified
- Government Gazette No. 27280, 18 February 2005
- Regulation where the measure is specified
- Regulations Relating To The Grading, Packing And Marking Of Canned Fruit Intended For Sale In The Republic Of South Africa
- Country/Region applying the measure
- South Africa
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 31. The quality requirements for canned granadillas and canned granadilla pulp are as follows:
Types of packing media and standards for types of packing media
(1) (a) Canned granadillas shall be packed in water to which sweeteners, as permitted under the Foodstuffs, Cosmetics and Disinfectants Act, 1972 (Act No. 54 of 1972), are added.
(b) Canned granadilla pulp shall consist of practically all fruit with very little free flowing liquid.
Quality Standards
(2) (a) There shall be five grades of canned granadillas and canned granadilla pulp, namely Fancy Grade, Choice Grade, Standard Grade, Substandard Grade and Manufacturers Grade.
(b) The quality standards for canned granadillas and canned granadilla pulp are as follows:(see Table on on page 52 of the Regulations) - Reference of the measure
- Regulation 31
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 2006.00.90 - Other Yes Canned granadillas and canned granadilla pulp 2008.99.90 --- Other Yes Canned granadillas and canned granadilla pulp - Description
- Canned granadillas and canned granadilla pulp
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 2006.00.90: - Other and 2008.99: -- Other
The measure came into effect on 18 May 2005
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 18 May 2005
- Publication where the measure is specified
- Government Gazette No. 27280, 18 February 2005
- Regulation where the measure is specified
- Regulations Relating To The Grading, Packing And Marking Of Canned Fruit Intended For Sale In The Republic Of South Africa
- Country/Region applying the measure
- South Africa
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 47. The quality requirements for canned quinces are as follows:
Styles and standards for styles
(1) (a) Canned quinces shall be presented as one of the following styles:
(i) Quince quarters
(ii) Quince slices
(b) (i) Quince quarters shall consist of peeled and cored quinces cut into four approximately equal parts.
(ii) Quince slices shall consist of peeled and cored quinces cut into wedge shaped units.
Quality Standards
(2) (a) There shall be four grades for canned quinces, namely Choice Grade, Standard Grade, Substandard Grade and Manufacturers Grade.
(b) The quality standards for canned quinces are as follows:(see Table on page 130 of the Regulations)
Permissible deviations (by number per container)
(3) The maximum permissible deviations for canned quinces are as follows:(see Table on page 131 of the Regulations) - Reference of the measure
- Regulation 47
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 2006.00.90 - Other Yes Canned quinces 2008.99 -- Other Yes Canned quinces - Description
- Canned quinces
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 2006.00.90: - Other and 2008.99: -- Other
The measure came into effect on 18 May 2005
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 18 May 2005
- Publication where the measure is specified
- Government Gazette No. 27280, 18 February 2005
- Regulation where the measure is specified
- Regulations Relating To The Grading, Packing And Marking Of Canned Fruit Intended For Sale In The Republic Of South Africa
- Country/Region applying the measure
- South Africa
- Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 46. The quality requirements for canned plums are as follows:
Styles and standards for styles
(1) (a) Canned plums shall be presented as one of the following styles:
(i) Whole plums
(ii) Plum halves
(b) (i) Whole plums shall consist of whole peeled or unpeeled plums which may be pitted or unpitted.
(ii) Plum halves shall consist of peeled or unpeeled and pitted plums cut into two approximately equal parts.
Quality Standards
(2) (a) There shall be five grades of canned plums namely Extra Choice Grade, Choice Grade, Standard Grade, Substandard Grade and Manufacturers Grade.
(b) The quality standards for canned plums are follows: (see Table on page 126 of the Regulations)
Permissible deviations (by number per container)
(3) The maximum permissible deviations for canned plums are as follows:(see Table on page 128 of the Regulations) - Reference of the measure
- Regulation 46
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 2006.00.90 - Other Yes Canned plums 2008.99 -- Other Yes Canned plums - Description
- Canned plums
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
B7: Product quality, safety or performance requirements
