English
FrançaisNon-tariff Measures
Showing items 5221 to 5240 of 7642
-
Applied by South Africa on the entire world for 7007.11: -- Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.2 Requirements for windows and partitions
3.2.1 Glass partitions and windows fitted to any trailer shall be:
a) of safety glass that complies with the relevant requirements given in SABS 1191, Safety glass for vehicles - High penetration resistant laminated safety glass for vehicles, SABS 1192, Safety glass for vehicles - Laminated safety glass for vehicles or SABS 1193, Safety glass for vehicles - Toughened safety glass for vehicles; or
b) of plastics safety glazing material that complies with the relevant requirements of SABS 1472, Plastics
safety glazing materials for motor vehicles. - Reference of the measure
- Regulation 3.2
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 7007.11 -- Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels Yes Windows and partitions - Description
- Windows and partitions
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8544: Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.5 Requirements for electrical connectors
Electrical connectors that are fitted for the purpose of towing, shall comply with:
a) in the case of 12 V systems:
1) SABS 1327, Electrical connectors for towing and towed vehicles (7-pole connectors), or 2) SABS ISO 11446, Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation; and
b) in the case of 24 V systems:
1) SABS 1327, Electrical connectors for towing and towed vehicles (7-pole connectors); or
2) SABS ISO 12098, Commercial vehicles with 24 V systems - 15-pole connectors between towing vehicles and trailers - Dimensions and contact allocation. - Reference of the measure
- Regulation 3.5
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8544 Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with Yes Electrical connectors - Description
- Electrical connectors
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8716.90.90: -- Other
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.7 Requirements for rear underrun protection devices
A rear underrun protection device shall be fitted to a trailer and shall comply with the relevant requirements given in SABS 1055, Motor vehicle safety : Rear underrun protection devices - Reference of the measure
- Regulation 3.7
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8716.90.90 -- Other Yes Rear underrun protection devices fitted to trailers of motor vehicles in categories O3/O4 - Description
- Rear underrun protection devices fitted to trailers of motor vehicles in categories O3/O4
a) category O3 are trailers with a maximum mass exceeding 3,5 metric ton but not exceeding 10 metric ton; and
b) category O4 are trailers with a maximum mass exceeding 10 metric ton
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8708.99.90: --- Other
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.8 Requirements for warning triangles
In the case of any vehicle supplied with warning triangles as part of the vehicle equipment, such
warning triangles shall comply with the requirements of SABS 1329-1, Retro- rerflective and flourescent warning signs for road vehicles-Part 1: Triangles - Reference of the measure
- Regulation 3.8
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8708.99.90 --- Other Yes Warning triangles of motor vehicles in categories O3/O4 - Description
- Warning triangles of motor vehicles in categories O3/O4
a) category O3 are trailers with a maximum mass exceeding 3,5 metric ton but not exceeding 10 metric ton; and
b) category O4 are trailers with a maximum mass exceeding 10 metric ton
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8539.21.90: --- Other
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.1 Requirements for lights, lighting equipment and rear warning signs
3.1.1 Lights
Lights fitted to a trailer shall comply with the relevant requirements as given in the following:
SABS ECE R3. Uniform provisions concerning the approval of retro-reflecting devices for power driven vehicles and their trailers;
SABS ECE R4. Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motorcycles) and their trailers;
SABS ECE R6. Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers;
SABS ECE R7. Uniform provisions concerning the approval offront and rear position (side) lamps, stoplamps
and end outline marker lamps for motor vehicles (except motor cycles) and their trailers;
SABS ECE R23. Uniform provisions concerning the approval of reversing lights for power driven vehicles and their trailers;
SABS ECE R37. Uniform provisions concerning the approval offilament lamps foruse in approved lamp units ofpower driven vehicles and trailers; and
SABS ECE R91, Uniform provisions concerning the approval of side-marker lamps for motor vehicles
and trailers.
3.1.2 Lighting and retro-reflectivity
Lighting and retro-reflective markings shall be fitted to a trailer and shall comply with the relevant requirements given in SABS ECE R48, Uniform provisions concerning the approval of vehicles with regard to the installation oflighting and light-signalling devices and SABS ECE R104, Uniform provisions concerning the approval of retro-reflective markings for heavy and long vehicles and their trailers. The requirements for the installation of retro-reflectors may be met by the use and fitting of retroreflectors that are defined in the relevant regulations of the Road Traffic Act, 1989 (Act 29 of 1989), or the National Road Traffic Act 1996 (Act 93 of 1996) and in addition, the requirements may also be met by the use and fitting of retro-reflectors that are integral portions of any other light lens assembly. - Reference of the measure
- Regulation 3.1.1 and 3.1.2
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8539.21.90 --- Other Yes Lights of motor vehicles in categories O3/O4 - Description
- Lights of motor vehicles in categories O3/O4
a) category O3 are trailers with a maximum mass exceeding 3,5 metric ton but not exceeding 10 metric ton; and
b) category O4 are trailers with a maximum mass exceeding 10 metric ton
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 4011: New pneumatic tyres, of rubber. and 4012: Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber.
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 6.1 Tyres
Tyres for trailers shall comply with the relevant requirements of the compulsory specification for pneumatic tyres for commercial vehicles and their trailers. - Reference of the measure
- Regulation 6.1
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 4011 New pneumatic tyres, of rubber. Yes Tyres fitted on trailers of motor vehicles in categories O3/O4 4012 Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber. Yes Tyres fitted on trailers of motor vehicles in categories O3/O4 - Description
- Tyres fitted on trailers of motor vehicles in categories O3/O4
a) category O3 are trailers with a maximum mass exceeding 3,5 metric ton but not exceeding 10 metric ton; and
b) category O4 are trailers with a maximum mass exceeding 10 metric ton
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8512.30: - Sound signalling equipment
The measure came into effect on 01 June 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 01 June 2010
- Publication where the measure is specified
- Government Gazette No. 33059, 1 April 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category M2/3
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category M2 and M3, and minibuses, not previously registered or licensed in South Africa, designed or adapted for operation on a public road. NOTE Except where stated otherwise, a semi-trailer bus should comply with a/l the requirements of this specification, and. in addition, with any compulsory requirements for the category 0 or N portions of the combination
not covered by this specification.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 This specification does not apply to experimental or to prototype vehicles constructed or imported by the original manufacturers or importers for the purpose of testing, assessment or development.
1.4 The relevant requirements of this specification shall take effect on the dates as specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.4.3 Audible warning devices
A vehicle shall be fitted with one or more audible warning devices such that, when they are operated, a continuous sound is emitted at a level of at least 93 dB, determined in accordance with SABS 0169: 1984, Determining the performance of audible warning devices (hooters) after installation in a motor vehicle, as published by Government Notice no. 966 of 11 May 1984.
4.3 Suppression of noise emission
4.3.1 Vehicles in motion
With the exception of noise emission that originates from audible warning devices, any noise emitted by a vehicle, when determined in accordance with SABS 0205: 1986, The measurement of noise emitted by motor vehicles in motion, as published by Government Notice no.936 of 16 May 1986, shall not exceed:
a) 84 dS(A), in the case of a category M2 vehicle that has a gross vehicle mass not exceeding 3,5 t,
b) 89 dS(A), in the case of a category M2 vehicle that has a gross vehicle mass exceeding 3,5 t and in the case of category M2 and M3 vehicles that have power units rated at less than 150 kW, and
c) 91 dS(A), in the case of all other category M2 and M3 vehicles.
To allow for any lack of precision in the measuring equipment, the highest sound level reading
obtained shall be reduced by 1 dS(A)
4.3.2 Vehicles when stationary
With the exception of noise emission originating from audible warning devices, any noise emitted by a vehicle, when determined in accordance with SABS 0181: 1981, The measurement of noise emitted by road vehicles when stationary, as published by Government Notice no. 463 of 9 July 1982, and SABS 0281:1994, Engine speed (S values), reference sound levels and permissible sound levels of stationary road vehicles, CIS published by Government Notice nO.1313 of 25 August 1995, and shall be recorded for homologation purposes.
4.3.3 Environmental noise regulations for workplace
In the case of any vehicle that is manufactured with the clear intention of its becoming a workplace, the interior of the vehicle shall comply with the applicable noise regulations promulgated under the Occupational Health and Safety Act, 1993 (Act 85 of 1993). - Reference of the measure
- Regulation 3.4.3 and 4.3
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8512.30 - Sound signalling equipment Yes Audible warning devices of motor vehicles in catergory M2/3 - Description
- Audible warning devices of motor vehicles in catergory M2/3
Category M2 motor vehicle, hereinafter referred to as a vehicle motor vehicle that is used for the carriage of passengers, that has at least four wheels, that has seating accommodation for more than eight passengers in addition to the driver of the vehicle, and Reproduced by Sabinet Online in terms of Government Printer’s Copyright Authority No. 10505 dated 02 February 1998 that has a maximum mass not exceeding 5 t
Category M3 motor vehicle, hereinafter referred to as a vehicle motor vehicle that is used for the carriage of passengers, that has at least four wheels, that has seating accommodation for more than eight passengers in addition to the driver of the vehicle, and that has a maximum mass exceeding 5 t
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8716.90.90: -- Other
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 6.2 Wheel flaps
All trailers of grss mass exceeding 3.5t shall be fitted with wheel flaps that comply with the relevant requirements given in SABS 1496, Wheel flaps fitted to motor vehicles. - Reference of the measure
- Regulation 6.2
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8716.90.90 -- Other Yes Wheel flaps fitted to trailers of motor vehicles in categories O3/O4 - Description
- Wheel flaps fitted to trailers of motor vehicles in categories O3/O4
a) category O3 are trailers with a maximum mass exceeding 3,5 metric ton but not exceeding 10 metric ton; and
b) category O4 are trailers with a maximum mass exceeding 10 metric ton
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8716: Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof.
The measure came into effect on 05 April 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 05 April 2010
- Publication where the measure is specified
- Government Gazette No.32916 , 5 February 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category O3/O4
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for vehicle models of category O3 and O4 designed or adapted for operation on a public road at speeds greater than 40 kph, including new vehicle models and vehicle models not previously registered or licensed in South Africa.
This specification also covers vehicles of category O3 and O4 designed and adapted for the purpose of the carriage of passengers, as in a semi-trailer bus, and these are also subject to further relevant requirements of the specification for category M2 and M3 motor vehicles (buses).
1.2 The requirements of the specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete vehicle supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 The specification does not apply to experimental or to prototype trailers constructed or imported by the original manufacturer or by importers for the purpose of testing, assessment or development, or to those military trailers that embody ordnance or missile systems, or to agricultural trailers.
1.4 The relevant requirements of this specification shall take effect on the date as specified in Schedule 1.
1.5 Where a South African national standard, including an international standard, or a UN ECE regulation adopted by the South Africa, is incorporated by reference into this specification, only the technical requirements/specification for the commodity, and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 6.3 Axle or axle unit suspension
A semi-trailer shall be fitted with axle suspension that complies with the relevant regulations of the National Road Traffic Act, 1996 (Act 93 of 1996). - Reference of the measure
- Regulation 6.3
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8716 Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof. Yes Semi-trailer fixed to motor vehicles in categories O3/O4 - Description
- Semi-trailer fixed to motor vehicles in categories O3/O4
a) category O3 are trailers with a maximum mass exceeding 3,5 metric ton but not exceeding 10 metric ton; and
b) category O4 are trailers with a maximum mass exceeding 10 metric ton
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8539.21.20: --- Identifiable for use solely or principally with motor vehicles (excluding quartz iodide lamps)
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or
licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister,
or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and
which are homologated under the rules of the International Federation of the Automobile (FIA) and
for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume)
Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory
Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in
schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE
regulation adopted by South Africa as a national standard, is incorporated by reference into this
specification, only the technical requirements/specification for the commodity and the tests to verify
the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.1 Requirements for lights and lighting equipment
3.1.1 Lights
Main and dipped-beam headlights, direction-indicator lights, stoplights, and front and rear position lights fitted to a vehicle shall comply with the relevant requirements given in SABS 1376-1:1983, Lights for motor vehicles - Part 1: Incandescent lamps, as published by Government Notice no. 563 of 29 July 1983, SABS 1376-2:1985, Lights for motor vehicles - Part 2: Headlights, as published by Government Notice no. 1263 of 14 June 1985, and SABS 1376-3:1985, Lights for motor vehicles - Part 3: Secondary lights, as published by Government Notice no. 2328 of 18 October 1985:
Provided that all other lights required or allowed to be fitted in terms of 3.1.2 are hereby excluded for the purposes of this subsection of this specification.
3.1.2 Lighting
Lighting shall be fitted to a vehicle and shall comply with the relevant requirements given in SABS 1046:1990, Motor vehicle safety specification for lights and light-signalling devices installed on motor vehicles and trailers, as published by Government Notice no. 1735 of 27 July 1990:
Provided that
a) the requirements for the installation of retro-reflectors as given in 4.14, 4.16 and 4.17 of the said SABS 1046 may be met by the use and fitting of retro-reflectors that are defined in the relevant regulations of the National Road Traffic Act, 1996 (Act 93 of 1996), and, in addition, the requirements may also be met by the use and fitting of retro-reflectors that are integral portions of any other light lens assembly, and
b) the specific requirements of the said SABS 1046 for
1) dipped beam adjustment devices as set out in 4.2.6 and appendix 1, and
2) end-outline marker lights as set out in 4.13, and
3) rear fog lights as set out in 4.11,
shall be treated as OPTIONAL for the purposes of this compulsory specification:
Provided that, if any motor vehicle is fitted with such devices or lamps, they shall comply with the applicable requirements. - Reference of the measure
- Regulation 3.1
- Measure also domestic
- Yes
- Notes
- Full details of the NTM will be entered when the SABS 1376-1, SABS 1376-2, SABS 1376-3, SABS, SABS 1046 are made available by the NTM Manager
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8539.21.20 --- Identifiable for use solely or principally with motor vehicles (excluding quartz iodide lamps) Yes Lights and lighting equipment for motor vehicles of category N1. - Description
- Lights and lighting equipment for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 7009.10: - Rear-view mirrors for vehicles
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.2.1 Rear-view mirrors
Rear-view mirrors shall be fitted to a vehicle and shall comply with the relevant requirements given in SABS 1436:1989, Motor vehicle safety specification for the rear-view mirrors of motor vehicles of categories M and N, as published by Government Notice no. 2008 of 22 September 1989. - Reference of the measure
- Regulation 3.2.1
- Measure also domestic
- Yes
- Notes
- Full details of the NTMs will be entered when SABS 1436:1989 is made available by the NTM Manager.
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 7009.10 - Rear-view mirrors for vehicles No - Description
- Rear-view mirrors for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 7007.21.20: --- Windscreens for vehicles
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.2.2.1 Windscreens
3.2.2.1.1 A windscreen shall be fitted to a vehicle and shall be of safety glass that complies with the relevant requirements given in SABS 1191:1978, High penetration-resistant laminated safety glass for vehicles, as published by Government Notice no. 463 of 9 July 1982.
3.2.2.1.2 For the purposes of this specification, the marking requirements shall be as follows:
a) the windscreen shall bear the glass manufacturer's registered trademark; and
b) the glass fitted shall comply with an approved national standard, recognized by the Regulatory Authority, that will provide a method of identifying the glass type. - Reference of the measure
- Regulation 3.2.2.1
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 7007.21.20 --- Windscreens for vehicles No - Description
- Windscreens for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 7007.11: -- Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.2.2.2 Windows and partitions
3.2.2.2.1 Glass partitions and glass windows fitted to a vehicle shall be of safety glass that complies with the relevant requirements given in the said SABS 1191 or in SABS 1193:1978, Toughened safety glass for vehicles, as published by Government Notice no. 463 of 9 July 1982.
3.2.2.2.2 For the purposes of this specification, the marking requirements shall be as follows:
a) the glass shall bear the glass manufacturer's registered trademark; and
b) the glass fitted shall comply with an approved national standard, recognized by the Regulatory Authority, that will provide a method of identifying the glass type. - Reference of the measure
- Regulation 3.2.2.2.1
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 7007.11 -- Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels Yes Glass partitions and glass windows for motor vehicles of category N1. - Description
- Glass partitions and glass windows for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8512.40: -Windscreen wipers, defrosters and demisters
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.2.3 Windscreen wipers
A vehicle shall be fitted with at least one windscreen wiper that is capable of operation by means other than manual, and the windscreen wiper blade, when in operation, shall wipe the outside of the windscreen directly in front of the driver, evenly and efficiently. - Reference of the measure
- Regulation 3.2.3
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8512.40 -Windscreen wipers, defrosters and demisters Yes Windscreen wipers for motor vehicles of category N1. - Description
- Windscreen wipers for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8708.30: - Brakes and servo-brakes; parts thereof
The measure came into effect on 11 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 11 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.3 Requirements for brakes and braking equipment
3.3.1 Braking equipment shall be fitted to a vehicle and shall comply with the requirements in SABS ECE R13 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking to the level of ECE R13.08.
3.3.2 For vehicles fitted with anti-lock braking systems, the braking equipment shall, in terms of braking performance, at least comply with the braking performance requirements for N1 vehicles with non anti-lock braking systems fitted.
3.3.3 For the purposes of this specification, the following requirements of SABS ECE R13 are excluded:
a) anti-lock specific brake test procedure and its requirements (paragraph 5 of annex 13 of SABS ECE R13).
3.3.4For the purposes of this compulsory specification, annex 4, paragraph 2.3.6 of SABS ECE R13 is amended to read as follows:
To check compliance with the requirements specified in paragraph 5.2.1.2.4 of SABS ECE R13, a Type-O test shall be carried out with the engine disconnected at an initial test speed of 30 km/h. The mean fully developed deceleration on application of the control of the parking brake system and the deceleration immediately before the vehicle stops shall be not less than 1,5 m/s2 . The test shall be carried out with a laden vehicle. The force exerted on the braking control device shall not exceed the specified values. - Reference of the measure
- Regulation 3.3
- Measure also domestic
- Yes
- Notes
- Full details about the NTM will be entered when SABS ECE R13 is made available by the NTM Manager.
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8708.30 - Brakes and servo-brakes; parts thereof No - Description
- Brakes and braking equipment for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8704.21: -- g.v.w. not exceeding 5 tonnes and 8704.31: -- g.v.w. not exceeding 5 tonnes
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.4 Requirements for controls, steering mechanism and audible warning
devices
3.4.1 Controls
3.4.1.1 General
All controls that are fitted to a vehicle, and that are required for the operation of the vehicle, shall be so located that the driver can reach and operate them when he is seated in the normal driving position:
Provided that in the case of vehicles of gross vehicle mass not exceeding 2500 kg, the normal driving position shall be with the seat belt fastened.
3.4.1.2 Right-hand drive
A vehicle shall be of a right-hand drive configuration, except as allowed in terms of 3.4.1.3.
3.4.1.3 Central steering
A vehicle may have a central steering configuration.
3.5 Requirements for door latches, hinges, entrances and exits
3.5.1 Door latches and hinges
Side doors fitted as a means of entrance or exit in a vehicle shall have door latches and hinges that comply with the relevant requirements given in SABS 1443: 1987 Motor vehicle safety specification for door latches and hinges, as published by Government Notice no. 2227 of 9 October 1987:
Provided that section 3 in annex 1 of the said SABS 1443 is excluded for the purposes of this
compulsory specification.
3.5.2 Entrances and exits
3.5.2.1 The means of entrance to and exit from a vehicle that is designed and constructed with a fixed hood and that has a tare exceeding 570 kg, shall be as follows:
a) at least one ready means of entrance and exit on the left and right sides of the vehicle, each such means being equipped with a permanent device that is capable of being operated from both the inside and the outside of the vehicle for the purpose of opening and closing; or
b) a means as specified in (a) above, provided on one side of the vehicle and, on the other side or at the back, an accessible means of escape, of size at least 450 mm x 450 mm, that is readily removable from both the inside and the outside of the vehicle or is equipped with a permanent device for opening and closing as specified in (a) above:
c) at least one ready means of entrance and exit at the back, if the vehicle has a separate passenger compartment that does not have entrances or exits and, if relevant, a ready means of escape as specified in (a) and (b) above or that does not afford passengers unobstructed access to the driving compartment.
3.5.2.2 The means of entrance and exit, and the means of escape shall be equipped with a door or other effective barrier, provided that the means of entrance and exit at the back of a motor vehicle need not be so equipped. Such door or other effective barrier shall be capable of being opened and closed from both the inside and the outside of the vehicle, provided that this provision shall not apply to the ready means of escape that has a barrier capable of being opened by being knocked out of its frame.
3.6 Requirements for seats, seat anchorages, restraining device anchorages, restraining devices (safety belts) and supplementary restraining devices (airbags)
3.6.1 Seats and seat anchorages
A vehicle shall be fitted with seats and seat anchorages that comply with the relevant requirements given in SABS 1429:1987, Motor vehicle safety specification for strength of seats and of their anchorages, as published by Government Notice no. 1878 of 4 September 1987.
3.6.2 Restraining device anchorages
All restraining devices that are fitted to a vehicle shall have restraining device anchorages that comply with the relevant requirements given in SASS 1430: 1987, Motor vehicle safety specification for anchorages for restraining devices in motor vehicles, as published by Government Notice no. 1878 of 4 September 1987.
3.6.3 Restraining devices (safety belts)
3.6.3.1 The restraining devices (safety belts) that are fitted to a vehicle shall comply with the relevant requirements given in SABS 1080:1983, Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements), as published by Government Notice no. 264 of 17 February 1984.
3.6.3.2 The type and location of the restraining devices (safety belts) required to be fitted to a vehicle and the method of installation thereof shall comply with the relevant requirements given in SABS 0168: 1983, The installation of restraining devices (safety belts) in motor vehicles, as published by Government Notice no. 265 of 17 February 1984.
3.6.4 Child restraints
In the case of any vehicle manufactured with child restraints installed, such child restraints shall comply with the compulsory specification for Child- restraining devices for use in motor vehicles as published by Government Notice no .642 of 2 May 1997.
3.6.5 Supplementary restraining devices (airbags)
3.6.5.1 If a motor vehicle is fitted with an airbag assembly, it shall carry information to the effect that it is equipped with such an assembly.
3.6.5.1.1 In the case of a motor vehicle fitted with an airbag assembly intended to protect the driver, the information shall consist of the inscription "AIRBAG" located in the interior of the circumference of the steering wheel; this inscription shall be durably affixed and easily visible.
3.6.5.1.2 In the case of a motor vehicle fitted with a passenger airbag intended to protect the front seat occupants other than the driver, this information shall consist of a warning label. An example of a possible design of a pictogram is shown in figure 1.
3.6.5.2 A motor vehicle fitted with one or more passenger airbags shall carry information about the extreme hazard associated with the use of rearward-facing child restraints on seats equipped with airbag assemblies.
3.6.5.2.1 Every passenger seating position which is fitted with an airbag shall be provided with a warning label against the use of a rearward-facing child restraint in that seating position. The warning label, in the form of a pictogram which may include explanatory text, shall be durably affixed and located such that it is easily visible in front of a person about to install a rearward-facing child restraint on the seat in question. An example of a possible design of a pictogram is shown in figure 1. A permanent reference should be visible at all times, in case the warning is not visible when the door is closed. This requirement does not apply to those seats equipped with a device which automatically deactivates the airbag assembly when a rearward-facing child restraint is installed.
4 Requirements for the control of environmental interference
4.1 Suppression of radio and television interference
A vehicle, its components and its accessories shall comply with the current applicable regulations relating to interference with communications, promulgated under the Telecommunications Act, 1996 (Act 103 of 1996).
4.2 Suppression of atmospheric pollution
4.2.1 The exhaust emission from the engine of a vehicle shall be such as to comply with the current applicable regulations promulgated under the Atmospheric Pollution Prevention Act, 1965 (Act 45 of 1965).
4.2.2 The gaseous and particulate emissions from the vehicle shall comply with the requirements of SABS ECE R83 Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements to the level of UN ECE R83.02, except for the type V test (durability of pollution control devices), if homologated after 1 February 2005 but before 1 January 2006, thereafter new homologations shall comply with 4.2.3, or
4.2.3 The gaseous and particulate emissions from the vehicle shall comply with the requirements of SABS 20083 Uniform provisions concerning the approval of vehicle with regard to the emissions
of pollutants according to engine fuel requirements to the level of ECE R83.04.
Important: For "Operative Dates, Exclusions and Exclusion Expiry Dates" for requirements in 4.2.2 and 4.2.3, see Schedule 1 attached
5.1 Vehicle dimensions
The dimensions of a vehicle shall comply with the applicable requirements of the relevant regulations of the National Road Traffic Act, 1996 (Act 93 of 1996).
5.2 Information plates
5.2.1 Data plates
5.2.1.1 A vehicle shall have a metal data plate or plates affixed by rivets, or by welding, or by any other method that will achieve permanency of attachment during the life of the vehicle, in a conspicuous and readily accessible position on a part not subject to replacement.
5.2.1.2 As an alternative to the above, a data plate may be a self-adhesive tamper proof metal or plastics label that is not transferable from one vehicle to another, is clearly legible, and undergoes permanent and obvious damage on removal. The self-adhesive tamper proof label shall be resistant to engine oils, to engine coolants, to normal engine temperatures and to humidity. In addition, it shall have permanency characteristics similar to those of the plate(s) described in 5.2.1.1
6 Requirements for vehicle equipment, components and systems
6.1 Speedometers
A vehicle that is capable of exceeding a speed of 25 km/h on a level road shall be equipped with speedometer equipment that complies with the relevant requirements given in SABS 1441 :1987, Motor vehicle safety specification for speedometer equipment
6 Requirements for vehicle equipment, components and systems
6.1 Speedometers
A vehicle that is capable of exceeding a speed of 25 km/h on a level road shall be equipped with
speedometer equipment that complies with the relevant requirements given in SABS 1441 :1987,
Motor vehicle safety specification for speedometer equipment on motor vehicles, as published by
Government Notice no. 1878 of 4 September 1987.
6.2 Engine, exhaust system and transmission
6.2.1 Engine
The engine of a vehicle shall be so fitted with a cover that any part of the engine that constitutes a source of danger is out of normal reach of a person.
6.2.2 Exhaust system
The exhaust system of a vehicle shall comply with the relevant regulations of the National Road Traffic Act.
6.2.3 Transmission
A vehicle, the tare of which exceeds 570 kg, shall be equipped with a transmission that enables it to be controlled and driven in both a forward and a reverse direction.
6.3 Fuel system
6.3.1 Fuel filler cap
The orifice for filling a fuel tank on a vehicle shall be fitted with an effective cap that prevents incidental ingress of water or other foreign matter.
6.3.2 Fuel filler inlet
A vehicle equipped with a positive-ignition engine shall be fitted with a fuel inlet orifice so designed that it prevents the tank from being filled from a petrol pump delivery nozzle which has an external diameter of 23.6 mm or greater.
For the purpose of this subsection, category N1 vehicles which are also offered in the M2 configuration shall be considered to be of category M2.
6.5 Vehicle bodies
Vehicle bodies referred to in 1.2 shall be provided with sufficient instructions on the selection and assembly of components, such that the completed vehicle complies (or is capable of complying) with the requirements of this specification, when the instructions are followed. - Reference of the measure
- Regulations 3.4.1 , 3.5.2 and 3.6
Regulations 4.1 and 4.2
Regulations 5.1, 5.2.1.1 and 5.2.1.2
Regulations 6.1, 6.2, 6.3 and 6.5 - Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8704.21 -- g.v.w. not exceeding 5 tonnes Yes motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels 8704.31 -- g.v.w. not exceeding 5 tonnes Yes motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels - Description
- Motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8531.10: - Burglar or fire alarms and similar apparatus
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.4.1.1 General
All controls that are fitted to a vehicle, and that are required for the operation of the vehicle, shall be so located that the driver can reach and operate them when he is seated in the normal driving position:
Provided that in the case of vehicles of gross vehicle mass not exceeding 2500 kg, the normal driving position shall be with the seat belt fastened.
3.4.2 Audible warning devices
A vehicle shall be fitted with one or more audible warning devices such that, when they are operated, a continuous sound is emitted at a level of at least 93 dB, determined in accordance with SABS 0169: 1984, Determining the performance of audible warning devices (hooters) after installation in a motor vehicle, as published by Government Notice no. 966 of 11 May 1984.
4.3 Suppression of noise emission - Vehicles in motion
With the exception of noise emission originating from audible warning devices, any noise emitted by a vehicle, determined in accordance with SABS 0205: 1986, The measurement of noise emitted by motor vehicles in motion, as published by Government Notice no. 936 of 16 May 1986, shall not exceed 82 dB(A). To allow for any lack of precision in the measuring equipment, the highest sound level reading obtained shall be reduced by 1 dB(A). - Reference of the measure
- Regulations 3.4.1.1 , 3.4.2 and 4.3
- Measure also domestic
- Yes
- Notes
- Full details about the NTM shall be entered when SABS 0169 is made available by the NTM Manager.
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8531.10 - Burglar or fire alarms and similar apparatus Yes Audible warning devices for motor vehicles of category N1. - Description
- Audible warning devices for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 4011: New pneumatic tyres, of rubber. and 4012: Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber.
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 6.4 Tyres
The tyres fitted to the wheels of a motor vehicle shall comply with the relevant requirements of the compulsory specification for Pneumatic tyres for commercial vehicles and trailers as published by Government Notice no. 1125 of 16 November 2001 and the National Road Traffic Act, 1996 (Act 93 of 1996). - Reference of the measure
- Regulations 6.4
- Measure also domestic
- Yes
- Notes
- Full details about the NTM will be entered online when Pneumatic tyres for commercial vehicles and trailers as published by Government Notice no. 1125 of 16 November 2001 and National Road Traffic Act, 1996 (Act
93 of 1996) are made available by the NTM Manager
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 4011 New pneumatic tyres, of rubber. Yes motor vehicle that has a maximum mass not exceeding 3,5 t 4012 Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber. Yes motor vehicle that has a maximum mass not exceeding 3,5 t - Description
- Tyres motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8531.10: - Burglar or fire alarms and similar apparatus
The measure came into effect on 19 January 2011
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 19 January 2011
- Publication where the measure is specified
- Government Gazette No.33763, 19 November 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category N1
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category N1, not previously registered or licensed in South Africa, and motor vehicle models assembled from new bodies and used parts from earlier designs of motor vehicle models, designed or adapted for operation on a public road.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire specification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer, In addition, the requirements shall apply to designs of bodies sold for the purposes of incorporating new or used parts of motor vehicle models previously homologated (or previously produced) by other manufacturers.
1.3 This specification does not apply to
a) experimental or prototype vehicles constructed or imported for the purpose of testing, assessment or development, or
b) a motor vehicle model that was manufactured before 1965, that was not previously registered or licensed in South Africa, and that is so certified by a motor club approved by the relevant Minister, or
c) motor vehicles designed or adapted principally for the purposes of motor sport competition, and which are homologated under the rules of the International Federation of the Automobile (FIA) and for which such homologation documentation is lodged with the Regulatory Authority, or
d) motor vehicles for which Type Approval was granted under European Small (Low Volume) Series alternative according to article 8 of the Directive EC/70/156, provided:-
i) that not more than 10 such vehicles are registered in South Africa each year, and
ii) copies of all relevant approval and test documentation are lodged with the Regulatory Authority.
1.4 The relevant requirements of this specification shall take effect on the dates specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply. - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.7 Requirements for anti-theft devices
Anti-theft devices shall be fitted and shall comply with the relevant requirements of SABS 1248:1986, Devices to prevent the unauthorized use of motor vehicles (anti-theft devices), as published by Government Notice no. 936 of 16 May 1986. - Reference of the measure
- Regulation 3.7
- Measure also domestic
- Yes
- Notes
- Full details about the NTM will be entered when SABS 1248:1986 is made available by the NTM Manager
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8531.10 - Burglar or fire alarms and similar apparatus Yes Anti-theft devices for motor vehicles of category N1. - Description
- Anti-theft devices for motor vehicles of category N1.
Category N1 motor vehicle, is a vehicle motor vehicle that has a maximum mass not exceeding 3,5 t, that has at least four wheels (or, provided that the maximum mass exceeds 1 t, at least three wheels), and that is used for the
carriage of goods.
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
-
Applied by South Africa on the entire world for 8708.99.90: --- Other
The measure came into effect on 01 June 2010
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 01 June 2010
- Publication where the measure is specified
- Government Gazette No. 33059, 1 April 2010
- Regulation where the measure is specified
- Amendment To The Compulsory Specification For Motor Vehicles Of Category M2/3
- Country/Region applying the measure
- South Africa
- The rationale of the measure
- 1.1 This specification covers the requirements for motor vehicle models of category M2 and M3, and minibuses, not previously registered or licensed in South Africa, designed or adapted for operation on a public road. NOTE Except where stated otherwise, a semi-trailer bus should comply with a/l the requirements of this specification, and. in addition, with any compulsory requirements for the category 0 or N portions of the combination
not covered by this specification.
1.2 The requirements of this specification shall, in so far as the parts already incorporated are concerned, apply in respect of an incomplete motor vehicle model supplied for further manufacture by one manufacturer to another, and the entire speCification shall apply to the vehicle after completion thereof by the last-mentioned manufacturer.
1.3 This specification does not apply to experimental or to prototype vehicles constructed or imported by the original manufacturers or importers for the purpose of testing, assessment or development.
1.4 The relevant requirements of this specification shall take effect on the dates as specified in schedule 1
1.5 Where a South African national standard, including an international standard or a UN ECE regulation adopted by South Africa as a national standard, is incorporated by reference into this specification, only the technical requirements/specification for the commodity and the tests to verify the compliance, apply - Coded list of objectives
- X: For purposes n.e.s.
- Description of the measure
- 3.8 Requirements for warning triangles
In the case of any vehicle of GVM exceeding 3,5 t that is supplied with warning triangles as part of the vehicle equipment, such warning triangles shall comply with the requirements given in SABS 1329-1 :1987, Retro-reflective and fluorescent warning signs for road vehicles - Part 1: Triangles, as published by Government Notice no. 2227 of 9 October 1987. - Reference of the measure
- Regulation 3.8
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 8708.99.90 --- Other Yes Warning triangles of motor vehicle of category M2/3 - Description
- Warning triangles of motor vehicle of category M2/3
Category M2 motor vehicle, hereinafter referred to as a vehicle motor vehicle that is used for the carriage of passengers, that has at least four wheels, that has seating accommodation for more than eight passengers in addition to the driver of the vehicle, and Reproduced by Sabinet Online in terms of Government Printer’s Copyright Authority No. 10505 dated 02 February 1998 that has a maximum mass not exceeding 5 t
Category M3 motor vehicle, hereinafter referred to as a vehicle motor vehicle that is used for the carriage of passengers, that has at least four wheels, that has seating accommodation for more than eight passengers in addition to the driver of the vehicle, and that has a maximum mass exceeding 5 t
Countries/Regions affected by the measure.
Inclusion/Exclusion Country Date in Date out Inclusion Entire world - Description
- All countries
B7: Product quality, safety or performance requirements
