English
FrançaisNon-tariff Measures
Showing items 4521 to 4540 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5183-1:1998, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper of 1:10 and for which the electrode taper fits in conformance with US ISO 1089.
- Reference of the measure
- US ISO 5183-1:1998
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Electrode adaptors, male taper 1:10
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5183-2:2000, Resistance welding equipment — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a male taper of 1:10 and a parallel shaft is used to fix the adaptor to the electrode holder in accordance with US ISO 8430-3.
- Reference of the measure
- US ISO 5183-2:2000
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Electrode adaptors, male taper 1:10
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5822:1988, Spot welding equipment — Taper plug gauges and taper ring gauges
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for taper plug and ring gauges used for the checking of type A, B and C tapers according to US ISO 1089.
- Reference of the measure
- US ISO 5822:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- taper plug and ring gauges
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5826:2014, Resistance welding equipment — Transformers — General specifications applicable to all transformers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard gives specifications applicable to the following types of transformers for use in resistance welding equipment:single-phase transformers for a.c. welding, typically operating at 50 Hz or 60 Hz;single-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz;single-phase inverter transformers with connected rectifier for d.c. welding, typically operating at 400 Hz to 2 kHz; andthree-phase transformers with connected rectifier for d.c. welding, typically operating at 50 Hz or 60 Hz.For the purposes of this standard, the term transformer can refer to the transformer alone or with connected rectifier (transformer-rectifier unit). This standard applies to transformers built to protection class I or II according to IEC 61140.
- Reference of the measure
- US ISO 5826:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Transformers for use in resistance welding equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5828:2001, Resistance welding equipment — Secondary connecting cables with terminals connected to water-cooled lugs — Dimensions and characteristics
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies dimensions and characteristics of secondary connecting cables which are aircooled over their length and with terminals connected to water-cooled lugs. The secondary connecting cables are used for connection between the secondary terminals of a welding transformer and the electrode holders.
- Reference of the measure
- US ISO 5828:2001
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Secondary connecting cables with terminals connected to water-cooled lugs
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7291:2010, Gas welding equipment — Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for pressure regulators in manifold systems used in welding, cutting, and allied processes for: compressed gases up to 30 MPa (300 bar);dissolved acetylene;liquefied petroleum gases (LPG);methylacetylene-propadiene-mixtures (MPS);carbon dioxide (CO2).It is not applicable to pressure regulators fitted directly to the gas cylinders, as defined in US ISO 2503.
- Reference of the measure
- US ISO 7291:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7931: 1985, Insulation taps and bushes for resistance welding equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies dimensions and requirements for insulated taps and bushes in the secondary circuit for resistance welding equipment, especially for use in back-ups according to ISO 5827.
- Reference of the measure
- US ISO 7931: 1985
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Insulation taps and bushes for resistance welding equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8430-1:1988, Resistance spot welding — Electrode holders — Part 1: Taper fixing 1:10
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type AI without offset and with the facility for cable clamping, and where a male taper 1:10 is used to fix the holder directly to the welding cylinder in multiple spot welding equipment.
- Reference of the measure
- US ISO 8430-1:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Resistance spot welding — Electrode holders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8430-2:1988, Resistance spot welding — Electrode holders — Part 2: Morse taper fixing
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type 9) without offset and with a facility for cable clamping, and where a male Morse taper is used to fix the holder directly to the welding cylinder in multiple spot welding equipment.
- Reference of the measure
- US ISO 8430-2:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Resistance spot welding — Electrode holders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8430-3:1988, Resistance spot welding — Electrode holders — Part 3: Parallel shank fixing for end thrust
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances of resistance spot welding electrode holders (type C) without offset and with a facility for cable clamping, and where a clamp is used to fix the holder directly to the welding cylinder in multiple spot welding equipment.
- Reference of the measure
- US ISO 8430-3:1988
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Resistance spot welding — Electrode holders
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9012:2008, Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for air-aspirated hand blowpipes. This standard applies to blowpipes for brazing, soldering, heating, fusion and other allied thermal processes, which use a fuel gas and aspirated air (injector-type blowpipes), and are intended for manual use. This International Standard is applicable to:air-aspirated hand blowpipes which are fed with a fuel gas in the gaseous phase, at a controlled pressure by a regulator, through a gas supply hose;air-aspirated hand blowpipes which are fed with a liquefied fuel gas in the gaseous phase at the container pressure, through a gas supply hose; andso-called liquid-phase blowpipes which are fed with a fuel gas in the liquid phase, and where thermal evaporation takes place within the blowpipe. It does not apply to blowpipes in which the fuel gas leaves the injector in the liquid phase, or to so-called “cartridge” blowpipes where the gas supply is fixed directly onto the blowpipe and possibly constitutes the shank.
- Reference of the measure
- US ISO 9012:2008
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Gas welding equipment — Air-aspirated hand blowpipes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9090:1989, Gas tightness of equipment for gas welding and allied processes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the maximum external leakage rates which are acceptable for equipment used for welding, cutting and allied processes. It applies to individual components which are used in the gas supply to a blowpipe from the connecting point of the hose (outlet of the cylinder valve or connecting point to a gas supply plant). It does not apply to gas supply plants.
- Reference of the measure
- US ISO 9090:1989
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Gas tightness of equipment for gas welding and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9312:2013, Resistance welding equipment — Insulated pins for use in electrode back-ups
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for insulated pins used to pin parts in the secondary circuit of resistance welding equipment, or other live equipment, which need to be insulated from each other.
- Reference of the measure
- US ISO 9312:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Insulated pins for use in Welding electrode back-ups
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9313:1989, Resistance welding equipment — Cooling tubes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies dimensions and tolerances of cooling tubes for resistance spot welding equipment.
- Reference of the measure
- US ISO 9313:1989
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- ooling tubes for resistance spot welding equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 9539:2010, Gas welding equipment — Materials for equipment used in gas welding, cutting and allied processes
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the general, and some of the special, requirements on materials used for the construction of equipment used in gas welding, cutting and allied processes. Additional requirements on materials for some equipment are given in other standards. This standard is not applicable to materials used for the construction of welding hoses which are specified in US ISO 3821.
- Reference of the measure
- US ISO 9539:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Materials for equipment used in gas welding, cutting and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 11611:2015, Protective clothing for use in welding and allied processes (2nd Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. . (This Uganda Standard cancels and replaces US ISO 11611:2007 which has been technically revised).
- Reference of the measure
- US ISO 11611:2015
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Protective clothing for use in welding and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 14112:1996, Gas welding equipment — Small kits for gas brazing and welding
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies safety requirements for the construction of small kits for brazing, soldering and welding for non-professional use. This standard is applicable to appliances whose welding equipment is completely set up in the factory and which use a liquefied gas or gas mixture as combustible gas, and compressed oxygen, air or an air/oxygen mixture for combustion. It is applicable to appliances which use gases contained in refillable containers having a maximum water capacity of 5 litres, or in disposable containers with maximum water capacity of 1 litre. It is not applicable to the following:appliances using acetylene or hydrogen as combustible gas;air-aspirated appliances;appliances working with an oxygen generator; and appliances working by electrolysis.
- Reference of the measure
- US ISO 14112:1996
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Small kits for gas brazing and welding
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 14113:2013, Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for rubber and plastics hose and hose assemblies for use with compressed, liquefied, and dissolved gases up to a maximum working pressure of 450 bar (45 MPa), within the ambient temperature range of −20 °C to +60 °C. This standard applies to hose assemblies used to connect industrial gas cylinders to manifolds or bundles prior to any pressure reduction stage. This standard does not cover rubber or thermoplastic hoses for welding, cutting, and allied processes (see US ISO 3821 and US ISO 12170). This standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG).
- Reference of the measure
- US ISO 14113:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 14114:1999, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — General requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard is applicable to acetylene cylinder manifold systems extending from the cylinder valve or the bundle outlet connections to the connection of the flame arrestor. It specifies requirements for design, materials and testing of cylinder manifold systems for the supply of acetylene for use in welding, cutting and allied processes. This standard applies to acetylene cylinder manifold systems in which up to 16 acetylene single cylinders or two acetylene bundles are coupled for collective gas withdrawal.
- Reference of the measure
- US ISO 14114:1999
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Acetylene manifold systems for welding, cutting and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 14373:2006, Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for resistance spot welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel, comprising two or three sheets of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm, for the following materials:
• uncoated steels;
• hot-dip zinc or iron-zinc alloy (galvannealed) coated steel;
• electrolytic zinc, zinc-iron, or zinc-nickel coated steel;
• aluminium coated steel; ad
• zinc-aluminium coated steel.
This standard is applicable to the welding of sheets of the same or dissimilar thickness, where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses, where the total thickness is less than or equal to 9 mm. Welding with the following types of equipment is within the scope of this standard:
• pedestal welding equipment;
• gun welders;
• automatic welding equipment where the components are fed by robots or automatic feeding equipment;
• multi welders; and
• robotic welders.
12170). This standard does not apply to refrigerated liquefied gases or to liquefied petroleum gases (LPG). - Reference of the measure
- US ISO 14373:2006
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- spot welding of uncoated and coated low carbon steels
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
