English
FrançaisNon-tariff Measures
Showing items 4561 to 4580 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-24:2010, Fire detection and alarm systems — Part 24: Sound-system loudspeakers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for loudspeakers intended to broadcast a warning of fire between a fire detection and alarm system and the occupants of a building (see US ISO 7240-1). This standard specifies loudspeakers for two types of application environment: type A, generally for indoor use, and type B, generally for outdoor use. This standard does not cover loudspeakers for special applications, for example loudspeakers for use in hazardous applications, if such applications require additional or other requirements or tests other than those given in this standard. This standard is not intended to cover addressable loudspeakers or loudspeakers with active components.
- Reference of the measure
- US ISO 7240-24:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Sound-system loudspeakers
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-25:2010, Fire detection and alarm systems — Part 25: Components using radio transmission paths
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for components used in fire detection and alarm systems, installed in and around buildings, which use radio-frequency (r.f.) transmission paths. It specifies requirements for the assessment of conformance of the components to the requirements of this standard. Where components work together and this requires knowledge of the system design, this standard also specifies requirements for the system. When the fire detection and alarm system uses wired and r.f. transmission paths, the relevant parts of US ISO 7240 apply together with this part of US ISO 7240. Requirements relevant to wire transmission paths are superseded or modified by those included in this standard. This standard does not restrict the intended use of radio spectrum, e.g. frequency, power output of devices;the allowed maximum number of the components using r.f. transmission paths within the fire detection and alarm system or one wire transmission path and/or r.f. transmission path; andthe allowed maximum number of the components affected by loss of one wire transmission path and/or r.f. transmission path.
- Reference of the measure
- US ISO 7240-25:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Components using radio transmission paths
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-27:2009, Fire detection and alarm systems — Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for multi-sensor point-type fire detectors that incorporate an optical or ionization smoke sensor, an electro-chemical cell for sensing carbon monoxide (CO) and, optionally, one or more heat sensors, for use in fire detection and alarm systems installed in buildings (see US ISO 7240-1). For the testing of other types of fire detectors using smoke, CO and, optionally, heat sensors working on different principles, this standard can be used only for guidance. Fire detectors using smoke, CO and, optionally, heat sensors which have special characteristics and which have been developed for specific risks are not covered by this standard.
- Reference of the measure
- US ISO 7240-27:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-28:2009, Fire detection and alarm systems — Part 28: Fire protection control equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for fire protection control equipment (f.p.c.e.) (see ISO 7240-1) connected to automatic fire protection equipment (a.f.p.e.) (see ISO 7240-1) installed in buildings. The f.p.c.e. receives signals from control and indicating equipment (see ISO 7240-1), sends control signals to, and indicates the condition of, the a.f.p.e. The control signals are used to initiate automatic fire protection equipment, such as pumps associated with fire suppression systems, control doors, dampers, fans and the like.
- Reference of the measure
- US ISO 7240-28:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire protection control equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 16528-1:2007, Boilers and pressure vessels — Part 1: Performance requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard defines the performance requirements for the construction of boilers and pressure vessels. It is not the intent of this standard to address operation, maintenance and in-service inspection of boilers and pressure vessels. In relation to the geometry of the pressure-containing parts for pressure vessels, the scope of this standard includes the following:
• welding end connection for the first circumferential joint for welded connections;
• first threaded joint for screwed connections;
• face of the first flange for bolted, flanged connections;
• first sealing surface for proprietary connections or fittings;
• safety accessories, where necessary.
In relation to the geometry of pressure-containing parts for boilers, the scope of this standard covers the following:
• feedwater inlet (including the inlet valve) to steam outlet (including the outlet valve), including all inter-connecting tubing that can be exposed to a risk of overheating and cannot be isolated from the main system;
• associated safety accessories;
• connections to the boilers involved in services, such as draining, venting, superheating, etc.
This standard does not apply for nuclear components, railway and marine boilers, gas cylinders or piping systems or mechanical equipment, e.g. turbine and machinery casings. - Reference of the measure
- US ISO 16528-1:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Boilers and pressure vessels
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 5775-2:1996, Bicycle tyres and rims — Part 2: Rims
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies rim dimensions for bicycle tyres: it gives only those rim contour dimensions necessary for tyre mounting and to fit the tyre on the rim. US ISO 5775-1 covers designations and dimensions for tyres. ISO 5775 covers straight side (SS) rims, hooked bead (HB) rims and crotchet type (C) rims.
- Reference of the measure
- US ISO 5775-2:1996
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- bicycle tyres rims
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 6698:1989, Cycles — Screw threads used to assemble freewheels on bicycle hubs
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the thread profile and limits and tolerances for the screw threads used to assemble freewheels on bicycle hubs. It is based on the use of the ISO basic thread profile given in ISO 68; satisfactory interchangeability with the corresponding British Standard Cycle (B.S.C.) thread; this has required the use of an inch pitch (t.p.i.);the use of screw thread tolerance grades and tolerance positions given in ISO 965-l1; and the use of gauges made to ISO 1502.
- Reference of the measure
- US ISO 6698:1989
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Screw threads used to assemble freewheels on bicycle hubs
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 6699:1990, Cycles — Stern and handlebar bend — Assembly dimensions
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the dimensions and tolerances to ensure secure assembly between the stem and the handlebar bend of a bicycle. lt applies to bicycles intended for use on public roads, and on which the saddle can be adjusted to provide a saddle height of 635 mm or more. lt does not apply to specialized types of bicycle such as tradesmen’s delivery bicycles, tandems, toy bicycles and bicycles designed and equipped for use in sanctioned competitive events.
- Reference of the measure
- US ISO 6699:1990
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Cycles — Stern and handlebar bend
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 8488:1986, Cycles — Screw threads used to assemble head fittings on bicycle forks
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies details of the screw threads used to assemble head races and locknuts, i.e. fittings, on bicycle fork steering columns.
- Reference of the measure
- US ISO 8488:1986
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Screw threads used to assemble head fittings on bicycle forks
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 1728:2006, Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements which ensure interchangeability of the pneumatic braking connections between motor vehicles and towed vehicles. It concerns vehicle combinations equipped with pneumatic braking systems with two lines: one control line and one supply line.
- Reference of the measure
- US ISO 1728:2006
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Pneumatic braking connections between motor vehicles and towed vehicles
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 764:2002, Horology — Magnetic resistant watches
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements for magnetic resistant watches. It is based on the simulation of an accidental exposure of a watch to a direct current magnetic field of 4 800 A/m. Annex A deals with watches designated as magnetic resistant with an additional indication of intensity of a magnetic field exceeding 4 800 A/m.
- Reference of the measure
- US ISO 764:2002
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Magnetic resistant watches
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 1413:1984, Horology — Shock resistant watches
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the minimum requirements for shock-resistant watches. It is intended to allow homologation testing of watches rather than the individual control of all watches of a production batch. Indeed, assuming that each watch could comply with the minimum requirements without apparent damage, readjustment could still be made necessary because the test can lead to an alteration of the initial rate of a watch. This standard is based on the simulation of the shock received by a watch on falling accidentally from a height of 1 m on to a horizontal hardwood surface.
- Reference of the measure
- US ISO 1413:1984
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Shock resistant watches
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 6425:1996, Divers’ watches
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for divers’ watches and for divers’ watches for use in deep diving.
- Reference of the measure
- US ISO 6425:1996
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- divers’ watches
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 22810:2010, Horology — Water-resistant watches
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard establishes the requirements for water resistance of watches. Moreover, it indicates the marking which the manufacturer is authorized to apply to them. Divers' watches, specified as such, are covered by US ISO 6425 which establishes special requirements.
- Reference of the measure
- US ISO 22810:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Water-resistant watches
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 1512:2014, Adhesives — Ethyl & methyl cyanocrylate types 1,2 and 3 — Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and methods of test for two grades of one component Grade M - methyl 2-cyanoacrylate and Grade E - ethyl-2-cyanoacrylate (commonly sold under trade name such as "Super Glue").
- Reference of the measure
- US 1512:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Ethyl & methyl cyanocrylate types 1,2 and 3 (super glue)
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 1572:2014, Standard specification for epoxy (flexible) adhesive for bonding metallic and non- metallic materials
- Country/Region applying the measure
- Uganda
- Description of the measure
- The Uganda Standard covers a two-part modified epoxy paste adhesive for bonding metallic and nonmetallic materials. The adhesive should be suitable for forming bonds that can withstand environmental exposure to temperatures from –184 to 82 °C (–300 to 180 °F) when exposed to an expected combination of stress, temperature, and relative humidity to be encountered in service
- Reference of the measure
- US 1572:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- epoxy (flexible) adhesive for bonding metallic and non- metallic materials
Countries/Regions affected by the measure.
-
Applied by Uganda for 3405.20.00: - Polishes, creams and similar preparations for the maintenance of wooden furniture, floors or other woodwork
The measure came into effect on 21 April 2015
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 1565:2014, Standard specification for water emulsion floor polish
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard covers floor polish intended for use on all non-wood floors and on sealed-wood floors.
- Reference of the measure
- US 1565:2014
- Measure also domestic
- Yes
Products affected by the measure.
Code Product Partial coverage Partial coverage indication Date in Date out 3405.20.00 - Polishes, creams and similar preparations for the maintenance of wooden furniture, floors or other woodwork Yes water emulsion floor polish - Description
- water emulsion floor polish
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 307:2014, Mosquito nets — Specification (3RD Edition)
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for long lasting insecticidal mosquito nets intended for malaria vector control.
- Reference of the measure
- US 307:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- mosquito nets
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 1583:2014, Fishing nets —Specification
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for fishing nets.
- Reference of the measure
- US 1583:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- fishing nets
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US 1570:2014, Standard consumer safety specification for soft infant and toddler carriers
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard establishes performance requirements to promote safe use of soft infant and toddler carriers.
- Reference of the measure
- US 1570:2014
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- soft infant and toddler carriers
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
