English
FrançaisNon-tariff Measures
Showing items 4541 to 4560 of 7642
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 15615:2013, Gas welding equipment — Acetylene manifold systems for welding, cutting and allied processes — Safety requirements in high-pressure devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard establishes the general specifications, requirements for devices located on the high-pressure side of acetylene manifold systems as defined in US ISO 14114. It does not cover the high-pressure piping, flexible hoses and the regulator.
- Reference of the measure
- US ISO 15615:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Acetylene manifold systems for welding, cutting and allied processes
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 18595:2007, Resistance welding — Spot welding of aluminium and aluminium alloys — Weldability, welding and testing
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for resistance spot welding in the fabrication of assemblies of aluminium sheet, extrusions (both work- and age-hardening alloys) and/or cast material comprising two or three thicknesses of metal, where the maximum single (sheet) thickness of components to be welded is within the range 0,6 mm to 6 mm. This standard is applicable to the welding of sheets or plates of dissimilar thickness where the thickness ratio is less than or equal to 3:1. It applies to the welding of three thicknesses where the total thickness is less than or equal to 9 mm. Welding with the following types of machines is within the scope of this International Standard:pedestal welding machines;gun welders;automatic welding equipment where the components are fed by robots or automatic feeding equipment;multi-welders; androbotic welders
- Reference of the measure
- US ISO 18595:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- aluminium and aluminium alloys
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 20349:2010, Personal protective equipment — Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding — Requirements
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for footwear protecting users against thermal risks and molten iron or aluminium metal splashes such as those encountered in foundries, welding and allied process. .
- Reference of the measure
- US ISO 20349:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-2:2003, Fire detection and alarm systems — Part 2: Control and indicating equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, and performance criteria for control and indicating equipment (c.i.e.) for use in fire detection and fire alarm systems installed in buildings.
- Reference of the measure
- US ISO 7240-2:2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-3:2010, Fire detection and alarm systems — Part 3: Audible alarm devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, and performance criteria for audible alarm devices intended to signal an audible warning of fire between a detection and alarm system and the occupants of a building. It is intended to cover only those devices which derive their operating power by means of a physical electrical connection to an external source such as a fire alarm system. This part of US ISO 7240 is also intended to cover audible alarm devices capable of giving voice messages by the application of specific requirements, tests and performance criteria. This standard specifies fire alarm audible alarm devices for two types of application environment, type A for indoor use and type B for outdoor use. This part of US ISO 7240 is not intended to cover: loudspeaker-type devices primarily intended for emitting emergency voice messages that are generated from an external audio source; and supervisory audible alarm devices, e.g. within the control and indicating equipment.
- Reference of the measure
- US ISO 7240-3:2010
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-4:2003, Fire detection and alarm systems — Part 4: Power supply equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, and performance criteria for power supply equipment (p.s.e.) for use in fire detection and alarm systems installed in buildings. It is not necessarily applicable to power supply equipment with special characteristics, developed for particular applications, which could require further tests.
- Reference of the measure
- US ISO 7240-4:2003
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-5:2012, Fire detection and alarm systems — Part 5: Point-type heat detectors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, and performance criteria for point-type heat detectors for use in fire detection and fire alarm systems for buildings (see US ISO 7240-1). For other types of heat detector or for detectors intended for use in other environments, this standard should only be used for guidance. This standard is not applicable to heat detectors with special characteristics and developed for specific risks.
- Reference of the measure
- US ISO 7240-5:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-6:2011, Fire detection and alarm systems — Part 6: Carbon monoxide fire detectors using electro-chemical cells
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, and performance criteria for point fire detectors using electro-chemical cells that operate using carbon-monoxide detection principles for use in fire detection and alarm systems installed in buildings (see US ISO 7240-1). For the testing of other types of CO fire detectors working on different principles, this part of US ISO 7240 can be used only for guidance. Fire detectors with special characteristics and developed for specific risks are not covered by this standard.
- Reference of the measure
- US ISO 7240-6:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Carbon monoxide fire detectors using electro-chemical cells
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-7:2011, Fire detection and alarm systems — Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements and performance criteria for point-type smoke detectors that operate using scattered light, transmitted light or ionization, for use in fire detection and alarm systems installed in buildings (see US ISO 7240-1). This standard also covers point smoke detectors that incorporate more than one smoke sensor operating on these principles. Additional requirements and test methods for such detectors are given in Annex N. For the testing of other types of smoke detectors, or smoke detectors working on different principles, this standard can be used only for guidance. Smoke detectors with special characteristics, developed for specific risks, are not covered
- Reference of the measure
- US ISO 7240-7:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Point-type smoke detectors using scattered light, transmitted light or ionization
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-8:2007, Fire detection and alarm systems — Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for point multi-sensor fire detectors that incorporate an electrochemical cell for sensing carbon monoxide (CO) in combination with one or more heat sensors, for use in fire detection and alarm systems installed in buildings (see US ISO 7240-1). For the testing of other types of CO multi-sensor fire detectors, or CO and heat multi-sensor fire detectors working on different principles, this standard can be used for guidance. CO and heat multi-sensor fire detectors with special characteristics and developed for specific risks are not covered by this standard.
- Reference of the measure
- US ISO 7240-8:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-10:2012, Fire detection and alarm systems — Part 10: Point-type flame detectors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for point-type, resettable flame detectors that operate using radiation from a flame for use in fire detection systems installed in buildings. This standard is not applicable to flame detectors with special characteristics, developed for specific risks.
- Reference of the measure
- US ISO 7240-10:2012
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Point-type flame detectors
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-11:2011, Fire detection and alarm systems — Part 11: Manual call points
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements;for manual call points in fire detection and alarm systems in and around buildings (see US ISO 7240-1). It takes into account indoor and outdoor conditions, the appearance and operation of the manual call points for type A “direct operation” and type B “indirect operation”, and covers those which are simple mechanical switches, those which are fitted with simple electronic components (e.g. resistors, diodes) and those which contain active electronic components and which work with the control and indicating equipment for signalling and identifying, for example, an address or location. This standard does not cover manual call points for special applications, for example manual call points that are intrinsically safe or for use in hazardous conditions, if such applications require additional or other requirements or tests than those given in this standard.
- Reference of the measure
- US ISO 7240-11:2011
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Manual call points
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-12:2006, Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements for line-type smoke detectors for use in fire detection systems installed in buildings. The detectors consist of at least a transmitter and a receiver and can include reflector(s), for the detection of smoke by the attenuation and/or changes in attenuation of an optical beam. This standard does not coverline-type smoke detectors designed to operate with separations between opposed components of less than 1 m;line-type smoke detectors whose optical path length is defined or adjusted by an integral mechanical connection; andline-type smoke detectors with special characteristics, which cannot be assessed by the test methods in this standard.
- Reference of the measure
- US ISO 7240-12:2006
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Line type smoke detectors using a transmitted optical beam
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-15:2004, Fire detection and alarm systems — Part 15: Multisensor fire detectors
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for point-type resettable multisensor fire detectors for use in fire detection systems installed in buildings, incorporating in one mechanical enclosure at least one smoke sensor and at least one other sensor which responds to heat, and in which the signal(s) of the smoke sensor(s) is (are) combined with the signal(s) of the heat sensor(s).
- Reference of the measure
- US ISO 7240-15:2004
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Multisensor fire detectors
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-16:2007, Fire detection and alarm systems — Part 16: Sound system control and indicating equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements for sound system control and indicating equipment (s.s.c.i.e.) for use in buildings and structures as part of a sound system for emergency purposes (s.s.e.p.) (see in US ISO 7240-1). The s.s.c.i.e. is primarily intended to broadcast information for the protection of lives within one or more specified areas in an emergency, to effect a rapid and orderly mobilization of occupants in an indoor or outdoor area. This includes systems using loudspeakers to broadcast voice announcements for emergency purposes, alert signals complying with ISO 7731, and evacuate signals complying with ISO 8201. The overall requirements of an s.s.e.p., especially concerning audibility and intelligibility, are contained within ISO 7240-19. In addition to ensuring compliance with this standard, the manufacturer should also consider the requirements of ISO 7240-19, national regulations, codes and standards that affect the s.s.c.i.e. design and usability. For example, some regulations require certain optional functions to be available on all s.s.c.i.e. installed within the jurisdiction. The use of the equipment for normal sound reinforcement and distribution systems purposes under nonhazardous circumstances is not excluded. This standard can also be used for the assessment of similar control and indicating equipment for use in systems where the warning-signal broadcast does not include a voice message. This standard does not apply to systems using only sounders or bells.
- Reference of the measure
- US ISO 7240-16:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Sound system control and indicating equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-17:2009, Fire detection and alarm systems — Part 17: Short-circuit isolators
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for short-circuit isolators, for use in fire detection and alarm systems for buildings; see US ISO 7240-1. Means of isolation or protection incorporated within control and indicating equipment in US ISO 7240-1 are not covered by this standard.
- Reference of the measure
- US ISO 7240-17:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Short-circuit isolators
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-18:2009, Fire detection and alarm systems — Part 18: Input/output devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for input/output devices connected to a transmission path of a fire detection and alarm system used to receive and/or transmit signals to or from the transmission path, necessary for the operation of the fire detection and fire alarm system and/or fire protection system. An input/output device can be a physically separate device or its function can be integrated into another device, in which case this standard can be used to assess this function. An input/output device can include signal amplifiers and signal transfer in separate enclosures, in which case the requirements of this standard shall apply. Control and indicating equipment and ancillary control and indicating equipment (e.g. repeater panels and fire brigade panels) are not covered by this standard.
- Reference of the measure
- US ISO 7240-18:2009
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Input/output devices
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-21:2005, Fire detection and alarm systems — Part 21: Routing equipment
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for fire-alarm routing (transmitting) equipment (see US ISO 7240-1) and for fault (trouble) warning routing equipment (see US ISO 7240-1) for use in fire detection and fire alarm systems installed in buildings.
- Reference of the measure
- US ISO 7240-21:2005
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems —Routing equipment
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-22:2007, Fire detection and alarm systems — Part 22: Smoke-detection equipment for ducts
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies requirements, for smoke-detection equipment for ducts (s.d.e.d.) for use in fire-detection and fire alarm systems installed in buildings (see US ISO 7240-1). The s.d.e.d. samples the air from a duct and detects smoke in the sample.
- Reference of the measure
- US ISO 7240-22:2007
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Smoke-detection equipment for ducts
Countries/Regions affected by the measure.
-
Non-Tariff Measure
- NTM classification
- B7: Product quality, safety or performance requirements
- Date when the measure came into force
- 21 April 2015
- Publication where the measure is specified
- UGANDA GAZETTE Vol. CVIII No. 20 of 21 April 2015
- Regulation where the measure is specified
- US ISO 7240-23:2013, Fire detection and alarm systems — Part 23: Visual alarm devices
- Country/Region applying the measure
- Uganda
- Description of the measure
- This Uganda Standard specifies the requirements, for visual alarm devices in a fixed installation intended to signal a visual warning of a fire between a fire detection and alarm system and occupants in and around buildings. This standard specifies visual alarm devices for three types of application environment. It is only applicable to pulsing or flashing visual alarm devices, for example xenon beacons or rotating beacons. It is not applicable to devices giving continuous light output. This standard is not intended to cover visual indicators, for example, on detectors or on the control and indicating equipment.
- Reference of the measure
- US ISO 7240-23:2013
- Measure also domestic
- Yes
Products affected by the measure.
- Description
- Fire detection and alarm systems — Visual alarm devices
Countries/Regions affected by the measure.
B7: Product quality, safety or performance requirements
